View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0001215 | K18X001.00 SKB SWAN | HW Issue | public | 2021-05-01 13:32 | 2022-01-10 11:39 |
| Reporter | (ALTech) Wooshin Kang | Assigned To | (HW) Sean Chiang | Due Date | 2021-06-05 14:25 |
| Priority | urgent | Severity | s4-minor | Reproducibility | have not tried |
| Status | closed | Resolution | open | ||
| Summary | 0001215: [SWAN] usb memory stick is not detected. | ||||
| Description | After booting, I did insert usb memory stick and memory stick is not detected. And then i try to unplug and plug several time, but it is not detected still. After power off->on, Usb is detected. Do you have any issue in USB detection..? | ||||
| Tags | No tags attached. | ||||
| Attach Tags | |||||
| related to | 0001018 | closed | (ALTech) Wooshin Kang | [SWAN] Please check "vold " code for mount USB MEMORY, |
| User List |
(ALTech) Lonnie Kim , (ALTech) Philip , (ALTech) SH Son , |
|---|
|
|
Please check this issue urgently. |
|
|
Hi Wooshin, Does this issue happen on USB3.0 port? We has same issue on Synaptics Jira 113 and still debug it. |
|
|
Hi River, When it will be fixed ? Please give us target date. Thanks. |
|
|
Hi, Philip I attached USB3.0 connector circuit of BFX-UA300 and VS-500 for you reference. Thanks! |
|
|
Hi, Tom I have a question about your schematics. Why do you apply pull-up resistor at enable pin? I think there need to apply pull-down resistor because active high. I think pull-up resistor may affect to initialized process because that pin already high before device attached. Best regards Lonnie Kim |
|
|
SWAN_USB_SANDISK_KERNAL PANIC_210511.txt (104,911 bytes)
init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
init syspll 800MHz
tsm: reRlKeEKa_seID i(db 0ytxed9[0c:927]0)7 ,= c 0o1mm00i0t 00ti00me0 00We0d0a A0p
r UL24T (13b:yt17e:[055:7 2]0) 19 -0 7= 040b
281c8a4461e1ec
Chip version = 0xa0
Check bootmode = 0x0 !
Image Load done with bootmode=0x0 !
NOTICE: bl31v13692d41f6
starting...5200a7914a95
PMIC: SY8824B selected for board bg5ct_ffv !
set Vcpu from 1050000uv to 1000000uv
set Vcore from 1050000uv to 1100000uv
####power down AMP.
sub_cmd_id: 4, param_len: 0x2c, 0x0, 0x4
check keys ret=1
####register ta LOGO
register_ta:tz comm rsp done! 80000000, 0
####register ta CYPT
register_ta:tz comm rsp done! 80000000, 0
[fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 6
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 6000100
MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1
MV_VPP_FL_Init:891: enableFlushCache=0, iHDMIEnable=0, enableAutoPush=1
[fastlogo] value of frame number=3
[fastlogo] got fit size logo: 1280x720(index:1, num:3)
[fastlogo] showlogo_start: logo_start=4148224, logo_size=1843200, logo_width=1280, logo_height=720, logo_stride=2560
MV_VPPOBJ_FL_DisplayFrame:4193: enableInterrupt=0
load boot normal image.
BOOT IMAGE HEADER VERSION: 2 !
[ 316]I(SM): key code:0xf708fb04
[ 319]E(SM): Invalid custom code 0xfb04.
verify slot done
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 7
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 7000200
DRM_SetVersionsV4: Bootpatchlevel: 0x30188
DRM_SetVersionsV4: Vendorpatchlevel: 0x30188
DRM_SetVersionsV4: Systempatchlevel: 0x30188
INFO: set eMMC dll_phsel0 to 0x2a for kernel.
size of allocated memory is not correct!
can't find the allocated memory
[ 0] Start kernel at 0x05880000
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.178 (jim@vas-010870-ubuntu18) (Android (5407736 based on r353983b) clang version 9.0.2 (https://android.googlesource.com/toolchain/clang 649b4adfc45b26ae937fe597ef6134d244f89686) (https://android.googlesource.com/toolchain/llvm 45936e9d187aaac2b7c0245f6f8c10138f6a02e9) (based on LLVM 9.0.2svn)) #1 SMP PREEMPT Tue May 11 02:39:53 CST 2021
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] MAX DMA PHYS limited to 2048MB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 22 pages/cpu s52288 r8192 d29632 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 638064
[ 0.000000] Kernel command line: androidboot.boot_devices=soc/f7aa0000.sdhci console=ttyS0,115200 init=/init root=/dev/ram0 androidboot.console=ttyS0 androidboot.hardware=sequoia androidboot.wificountrycode=US firmware_class.path=/vendor/firmware loop.max_part=7 max_dma_phys=2G buildvariant=userdebug androidboot.serialno=000000002099 androidboot.deviceid=DEVID123456789 androidboot.vbmeta.device=PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d androidboot.vbmeta.avb_version=1.1 androidboot.vbmeta.device_state=locked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=6848 androidboot.vbmeta.digest=7ee54280d769eeb85ef6bf536e775cc2af7a50a22aaaf188a4e276c2a8fbbf52 androidboot.veritymode=disabled androidboot.dtbo_idx=0 androidboot.dtb_idx=0 androidboot.bootloader=2016.11-00210-g6a9651b-dirty macaddr=5c:ba:ef:fe:bf:62 emmc_ts.dev_id=18 emmc_ts.size=4194304 emmc_ts.erasesize=524288 emmc_ts.writesize=8192 androidboot.verifiedbootstate=green androidboot.bootreason=normal_boot chipid=a0010000
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 13644(83%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB: mapped [mem 0x45bff000-0x49bff000] (64MB)
[ 0.000000] Memory: 2026980K/2592768K available (9662K kernel code, 1070K rwdata, 3308K rodata, 2432K init, 482K bss, 565788K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 9664 KB)
[ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 3328 KB)
[ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 2432 KB)
[ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 1070 KB)
[ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 483 KB)
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00160000 - 0xffffffbf03000000 ( 46 MB actual)
[ 0.000000] memory : 0xffffffc005800000 - 0xffffffc0c0000000 ( 2984 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.000528] Console: colour dummy device 80x25
[ 0.000547] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[ 0.000559] pid_max: default: 32768 minimum: 301
[ 0.000634] Security Framework initialized
[ 0.000643] SELinux: Initializing.
[ 0.000701] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.000711] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001630] sched-energy: CPU device node has no sched-energy-costs
[ 0.001638] Invalid sched_group_energy for CPU0
[ 0.001644] CPU0: update cpu_capacity 1024
[ 0.029957] ASID allocator initialised with 65536 entries
[ 0.200227] Detected VIPT I-cache on CPU1
[ 0.200264] Invalid sched_group_energy for CPU1
[ 0.200267] CPU1: update cpu_capacity 1024
[ 0.200271] CPU1: Booted secondary processor [410fd034]
[ 0.280306] Detected VIPT I-cache on CPU2
[ 0.280333] Invalid sched_group_energy for CPU2
[ 0.280336] CPU2: update cpu_capacity 1024
[ 0.280339] CPU2: Booted secondary processor [410fd034]
[ 0.360388] Detected VIPT I-cache on CPU3
[ 0.360415] Invalid sched_group_energy for CPU3
[ 0.360418] CPU3: update cpu_capacity 1024
[ 0.360420] CPU3: Booted secondary processor [410fd034]
[ 0.360499] Brought up 4 CPUs
[ 0.360537] SMP: Total of 4 processors activated.
[ 0.360546] CPU features: detected feature: 32-bit EL0 Support
[ 0.360557] CPU: All CPU(s) started at EL2
[ 0.360579] alternatives: patching kernel code
[ 0.360729] Invalid sched_group_energy for Cluster3
[ 0.360738] CPU3: update max cpu_capacity 1024
[ 0.360744] Invalid sched_group_energy for Cluster2
[ 0.360749] Invalid sched_group_energy for Cluster1
[ 0.360755] Invalid sched_group_energy for Cluster0
[ 0.370321] CPU1: update max cpu_capacity 1024
[ 0.370485] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.370500] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.370649] pinctrl core: initialized pinctrl subsystem
[ 0.371359] NET: Registered protocol family 16
[ 0.400389] cpuidle: using governor menu
[ 0.400659] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
[ 0.400669] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.400863] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.451003] SCSI subsystem initialized
[ 0.451200] usbcore: registered new interface driver usbfs
[ 0.451253] usbcore: registered new interface driver hub
[ 0.451311] usbcore: registered new device driver usb
[ 0.452368] i2c_designware f7fcb000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw2-pmux, deferring probe
[ 0.452400] i2c_designware f7fcc000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw3-pmux, deferring probe
[ 0.452438] Linux video capture interface: v2.00
[ 0.452653] Marvell Berlin ION information
[ 0.452663] heap_id[0] memory start[49c00000] len[1a000000] name[NonSecure] type[2] attri[00000f36]
[ 0.452672] heap_id[1] memory start[63c00000] len[01400000] name[NonSecure-NC] type[5] attri[00000f3a]
[ 0.452680] heap_id[2] memory start[65000000] len[1b000000] name[Secure] type[5] attri[00000f3d]
[ 0.452688] heap_id[3] memory start[00000000] len[00000000] name[system-ion] type[0] attri[00000000]
[ 0.452694] berlin found 1 secure heap
[ 0.452699] berlin found secure heap[0] head_id[2]
[ 0.544375] Advanced Linux Sound Architecture Driver Initialized.
[ 0.544862] Bluetooth: Core ver 2.22
[ 0.544896] NET: Registered protocol family 31
[ 0.544902] Bluetooth: HCI device and connection manager initialized
[ 0.544914] Bluetooth: HCI socket layer initialized
[ 0.544924] Bluetooth: L2CAP socket layer initialized
[ 0.544954] Bluetooth: SCO socket layer initialized
[ 0.545714] clocksource: Switched to clocksource arch_sys_counter
[ 0.601048] VFS: Disk quotas dquot_6.6.0
[ 0.601112] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.606306] NET: Registered protocol family 2
[ 0.645816] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.646123] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.646762] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.646830] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.646943] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.647172] NET: Registered protocol family 1
[ 0.647431] Trying to unpack rootfs image as initramfs...
[ 0.682088] Freeing initrd memory: 752K
[ 0.682639] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.684874] audit: initializing netlink subsys (disabled)
[ 0.684934] audit: type=2000 audit(1234567890.670:1): initialized
[ 0.685519] workingset: timestamp_bits=45 max_order=19 bucket_order=0
[ 0.692550] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.692723] Registering sdcardfs 0.1
[ 0.692972] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.693176] fuse init (API version 7.26)
[ 0.698083] io scheduler noop registered
[ 0.698091] io scheduler deadline registered (default)
[ 0.698212] io scheduler cfq registered
[ 0.705061] GPIO line 359 (phy0_reset) hogged as output/high
[ 0.723224] marvell,berlin-sm f7f80000.sm: rtc core: registered bsm_rtc as rtc0
[ 0.723974] tz_logger_dev: created 128K log 'tzlogger'
[ 0.723986] MV_VPP_InitMode:Normal mode, ta_flag:0
[ 0.724297] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.725021] console [ttyS0] disabled
[ 0.725069] f7fcd000.uart: ttyS0 at MMIO 0xf7fcd000 (irq = 32, base_baud = 1562500) is a 16550A
[ 1.656804] console [ttyS0] enabled
[ 1.660851] f7fce000.uart: ttyS1 at MMIO 0xf7fce000 (irq = 33, base_baud = 1562500) is a 16550A
[ 1.670090] [drm] Initialized
[ 1.682029] brd: module loaded
[ 1.694450] loop: module loaded
[ 1.698226] zram: Added device: zram0
[ 1.702485] libphy: Fixed MDIO Bus: probed
[ 1.707150] tun: Universal TUN/TAP device driver, 1.6
[ 1.712367] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.720449] Network controller revision: 0010
[ 1.726148] mvneta f7b60000.ethernet eth0: Using random mac address f2:97:d2:6c:42:4c
[ 1.734447] libphy: orion_mdio_bus: probed
[ 1.739353] PPP generic driver version 2.4.2
[ 1.743852] PPP BSD Compression module registered
[ 1.748725] PPP Deflate Compression module registered
[ 1.753960] PPP MPPE Compression module registered
[ 1.758920] NET: Registered protocol family 24
[ 1.763509] PPTP driver version 0.8.5
[ 1.767612] usbcore: registered new interface driver r8152
[ 1.773325] usbcore: registered new interface driver asix
[ 1.778960] usbcore: registered new interface driver ax88179_178a
[ 1.785288] usbcore: registered new interface driver cdc_ether
[ 1.791366] usbcore: registered new interface driver net1080
[ 1.797260] usbcore: registered new interface driver cdc_subset
[ 1.803426] usbcore: registered new interface driver cdc_ncm
[ 1.809282] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.816438] usbcore: registered new interface driver usb-storage
[ 1.822814] ci_hdrc_usb2_probe---------------61 probe start
[ 1.829646] input: Infra-Red as /devices/virtual/input/input0
[ [ 304 9 ]I1(.SM)8: 3**58*1**4**]I R uresadbyc**or**e**:**
registered new interface driver xpad
[ 1.845119] usbcore: registered new interface driver usb_acecad
[ 1.851281] usbcore: registered new interface driver aiptek
[ 1.857082] usbcore: registered new interface driver gtco
[ 1.862692] usbcore: registered new interface driver hanwang
[ 1.868583] usbcore: registered new interface driver kbtab
[ 1.874313] i2c /dev entries driver
[ 1.878172] usbcore: registered new interface driver uvcvideo
[ 1.884105] USB Video Class driver (1.1.1)
[ 1.888347] gspca_main: v2.14.0 registered
[ 1.893004] device-mapper: uevent: version 1.0.3
[ 1.897977] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.906795] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d
[ 1.919283] rtk_btusb: RTKBT_RELEASE_NAME: 20200519_BT_ANDROID_10.0
[ 1.925763] rtk_btusb: Realtek Bluetooth USB driver module init, version 5.2.1
[ 1.933219] rtk_btusb: Register usb char device interface for BT driver
[ 1.940194] usbcore: registered new interface driver rtk_btusb
[ 1.946882] sdhci: Secure Digital Host Controller Interface driver
[ 1.953263] sdhci: Copyright(c) Pierre Ossman
[ 1.957873] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.015774] mmc0: SDHCI controller on f7aa0000.sdhci [f7aa0000.sdhci] using ADMA
[ 2.025643] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.034578] usbcore: registered new interface driver usbhid
[ 2.040372] usbhid: USB HID core driver
[ 2.046561] ashmem: initialized
[ 2.051347] usbcore: registered new interface driver snd-usb-audio
[ 2.059063] ioremap success: vir_addr: (ptrval), size: 0x3000000, phy_addr: (ptrval)!
[ 2.069235] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.077623] register card failed (-517)
[ 2.081673] snd_bt_init
[ 2.084281] u32 classifier
[ 2.087116] Actions configured
[ 2.090654] Netfilter messages via NETLINK v0.30.
[ 2.095756] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.102211] ctnetlink v0.93: registering with nfnetlink.
[ 2.108001] xt_time: kernel timezone is -0000
[ 2.112613] gre: GRE over IPv4 demultiplexor driver
[ 2.117693] IPv4 over IPsec tunneling driver
[ 2.122686] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.128429] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 2.134360] Initializing XFRM netlink socket
[ 2.138878] IPsec XFRM device driver
[ 2.143041] NET: Registered protocol family 10
[ 2.148893] mip6: Mobile IPv6
[ 2.150291] mmc0: new HS400 MMC card at address 0001
[ 2.150723] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 2.150939] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[ 2.151171] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[ 2.161417] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
[ 2.163982] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23
[ 2.189778] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.196097] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.203213] NET: Registered protocol family 17
[ 2.207835] NET: Registered protocol family 15
[ 2.212444] l2tp_core: L2TP core driver, V2.0
[ 2.216966] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 2.222248] Registered cp15_barrier emulation handler
[ 2.227525] Registered setend emulation handler
[ 2.232578] registered taskstats version 1
[ 2.238926] Key type encrypted registered
[ 2.243079] FB: VPP init mode status failed!
[ 2.259246] xhci-hcd f7a20000.xhci: xHCI Host Controller
[ 2.264754] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 1
[ 2.272643] xhci-hcd f7a20000.xhci: hcc params 0x0a000998 hci version 0x100 quirks 0x00010010
[ 2.281509] xhci-hcd f7a20000.xhci: irq 21, io mem 0xf7a20000
[ 2.287621] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.294633] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.302109] usb usb1: Product: xHCI Host Controller
[ 2.307159] usb usb1: Manufacturer: Linux 4.9.178 xhci-hcd
[ 2.312826] usb usb1: SerialNumber: f7a20000.xhci
[ 2.318083] hub 1-0:1.0: USB hub found
[ 2.321986] hub 1-0:1.0: 1 port detected
[ 2.326324] xhci-hcd f7a20000.xhci: xHCI Host Controller
[ 2.331821] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 2
[ 2.339626] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.348098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.355111] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.362583] usb usb2: Product: xHCI Host Controller
[ 2.367633] usb usb2: Manufacturer: Linux 4.9.178 xhci-hcd
[ 2.373300] usb usb2: SerialNumber: f7a20000.xhci
[ 2.378543] hub 2-0:1.0: USB hub found
[ 2.382441] hub 2-0:1.0: 1 port detected
[ 2.386896] ci_hdrc_usb2_probe---------------61 probe start
[ 2.395932] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.400980] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 3
[ 2.435736] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.441450] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.448479] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.455948] usb usb3: Product: EHCI Host Controller
[ 2.460988] usb usb3: Manufacturer: Linux 4.9.178 ehci_hcd
[ 2.466664] usb usb3: SerialNumber: ci_hdrc.0
[ 2.471535] hub 3-0:1.0: USB hub found
[ 2.475440] hub 3-0:1.0: 1 port detected
[ 2.479883] chipidea-usb2 f7ed0000.usb: set of GPIOH_5(496) as USB Hub reset
[ 2.487182] chipidea-usb2 f7ed0000.usb: ok to acquire gpio and set output
[ 2.495580] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.504019] register card failed (-517)
[ 2.508784] ALSA device list:
[ 2.511852] No soundcards found.
[ 2.515476] ttyS0 - failed to request DMA
[ 2.520204] Freeing unused kernel memory: 2432K
[ 2.529001] init: init first stage started!
[ 2.533612] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[ 2.541752] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.572290] init: [libfs_mgr]Created logical partition product on device /dev/block/dm-0
[ 2.581304] init: [libfs_mgr]Created logical partition vendor on device /dev/block/dm-1
[ 2.590283] init: [libfs_mgr]Created logical partition system on device /dev/block/dm-2
[ 2.599013] init: [libfs_mgr]superblock s_max_mnt_count:10,/dev/block/by-name/metadata
[ 2.607438] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[ 2.621260] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory
[ 2.632539] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk0p20 (executable not in system image)
[ 2.647730] EXT4-fs (mmcblk0p20): warning: maximal mount count reached, running e2fsck is recommended
[ 2.657797] EXT4-fs (mmcblk0p20): recovery complete
[ 2.663215] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: discard
[ 2.686537] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1
[ 2.698964] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1
[ 2.707886] random: fast init done
[ 2.712255] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1
[ 2.726334] init: 16 output lines suppressed due to ratelimiting
[ 2.735480] random: init: uninitialized urandom read (40 bytes read)
[ 2.812186] random: init: uninitialized urandom read (40 bytes read)
[ 2.825942] init: Loading SELinux policy
[ 2.865830] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 2.896504] usb 2-1: New USB device found, idVendor=0781, idProduct=5591
[ 2.903425] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.910806] usb 2-1: Product: Ultra USB 3.0
[ 2.915124] usb 2-1: Manufacturer: SanDisk
[ 2.919366] usb 2-1: SerialNumber: 4C530000151204101550
[ 2.925181] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 2.931849] scsi host0: usb-storage 2-1:1.0
[ 2.936606] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.944958] register card failed (-517)
[ 2.960564] audit: type=1403 audit(1234567892.950:2): policy loaded auid=4294967295 ses=4294967295
[ 2.970046] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
[ 2.970046]
[ 2.980442] audit: type=1404 audit(1234567892.970:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 3.050776] selinux: SELinux: Loaded file_contexts
[ 3.050776]
[ 3.060931] random: init: uninitialized urandom read (40 bytes read)
[ 3.100527] init: init second stage started!
[ 3.129218] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 3.141702] selinux: SELinux: Loaded file_contexts
[ 3.141702]
[ 3.148234] init: Running restorecon...
[ 3.166433] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 3.166433]
[ 3.181722] init: Do not have permissions to set 'ro.com.google.gmsversion' to 'Q_GTVS' in property file '/vendor/build.prop': SELinux permission check failed
[ 3.196464] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 3.196464]
[ 3.211742] init: Do not have permissions to set 'ro.product.firmware_version' to '19.524.19' in property file '/vendor/build.prop': SELinux permission check failed
[ 3.227984] init: Couldn't load property file '/product_services/build.prop': open() failed: No such file or directory: No such file or directory
[ 3.241485] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[ 3.442070] ueventd: ueventd started!
[ 3.449087] apexd: Bootstrap subcommand detected
[ 3.449795] selinux: SELinux: Loaded file_contexts
[ 3.449795]
[ 3.449933] ueventd: Parsing file /ueventd.rc...
[ 3.460880] ueventd: Parsing file /vendor/ueventd.rc...
[ 3.470902] ueventd: Parsing file /odm/ueventd.rc...
[ 3.475269] apexd: Scanning /system/apex for embedded keys
[ 3.476109] apexd: Scanning /product/apex for embedded keys
[ 3.476208] apexd: ... does not exist. Skipping
[ 3.476301] apexd: Scanning /system/apex looking for APEX packages.
[ 3.476445] apexd: Found /system/apex/com.android.conscrypt
[ 3.476637] apexd: Skipped when bootstrapping
[ 3.476731] apexd: Found /system/apex/com.android.media
[ 3.476922] apexd: Skipped when bootstrapping
[ 3.477020] apexd: Found /system/apex/com.android.media.swcodec
[ 3.479768] apexd: 9 output lines suppressed due to ratelimiting
[ 3.489393] audit: type=1400 audit(1234567893.480:4): avc: denied { write } for pid=173 comm="init" name="panic_on_oops" dev="proc" ino=7140 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_panic:s0 tclass=file permissive=0
[ 3.490317] audit: type=1400 audit(1234567893.480:5): avc: denied { write } for pid=173 comm="init" name="hung_task_timeout_secs" dev="proc" ino=7143 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_hung_task:s0 tclass=file permissive=0
[ 3.556690] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.556694] register card failed (-517)
[ 3.582774] [amp_driver] register cdev device major [246]
[ 3.582777] [amp_driver] setup cdevs device minor [0]
[ 3.582840] [amp_driver] create device sysfs [ampcore]
[ 3.582847] [amp_driver] amp_device_init ok
[ 3.582964] [amp_driver] amp_probe OK
[ 3.583117] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.583120] register card failed (-517)
[ 3.604539] [tsp kernel driver] register cdev device major [245]
[ 3.604542] [tsp kernel driver] setup cdevs device minor [0]
[ 3.604608] [tsp kernel driver] create device sysfs [tsp]
[ 3.604609] [tsp kernel driver] tsp_device_init ok
[ 3.604610] [tsp kernel driver] berlin_tsp_probe OK
[ 3.604765] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.604768] register card failed (-517)
[ 3.625698] [vpu kernel driver] vpu probe enter
[ 3.625701] [vpu kernel driver] find vpu device h1
[ 3.625753] [vpu kernel driver] request irq:18
[ 3.625756] [vpu kernel driver] register space [mem 0xf7000000-0xf73fffff]
[ 3.625859] [vpu kernel driver] vpu:h1 probe ok
[ 3.626009] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.626012] register card failed (-517)
[ 3.626045] [vpu kernel driver] vpu probe enter
[ 3.626049] [vpu kernel driver] find vpu device vxg
[ 3.626056] [vpu kernel driver] request irq:19
[ 3.626058] [vpu kernel driver] register space [mem 0xf7600000-0xf77fffff]
[ 3.626113] [vpu kernel driver] vpu:vxg probe ok
[ 3.626193] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.626195] register card failed (-517)
[ 3.647127] [zsp kernel driver] zsp probe enter
[ 3.647152] [zsp kernel driver] register space [mem 0xf7c00000-0xf7c7ffff]
[ 3.647238] [zsp kernel driver] zsp:zsp probe ok
[ 3.647395] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.647398] register card failed (-517)
[ 3.769052] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 3.779146] ueventd: Parsing file /ueventd.sequoia.rc...
[ 3.784648] ueventd: Unable to read config file '/ueventd.sequoia.rc': open() failed: No such file or directory
[ 3.978937] ueventd: Coldboot took 0.183 seconds
[ 4.006703] scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
[ 4.015814] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 4.018806] Registered swp emulation handler
[ 4.026038] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 4.026042] register card failed (-517)
[ 4.041898] sd 0:0:0:0: [sda] Write Protect is off
[ 4.047611] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.064267] sda: sda1
[ 4.068184] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.071977] file system registered
[ 4.096854] logd.auditd: start
[ 4.100036] logd.klogd: 4094320040
[ 4.111238] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts:
[ 4.125394] EXT4-fs (mmcblk0p21): Ignoring removed nomblk_io_submit option
[ 4.144444] EXT4-fs (mmcblk0p21): recovery complete
[ 4.150517] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 4.273378] e2fsck: e2fsck 1.44.4 (18-Aug-2018)
[ 4.273378]
[ 4.279625] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 4.279625]
[ 4.287200] e2fsck: Pass 2: Checking directory structure
[ 4.287200]
[ 4.294213] e2fsck: Pass 3: Checking directory connectivity
[ 4.294213]
[ 4.301508] e2fsck: Pass 4: Checking reference counts
[ 4.301508]
[ 4.308266] e2fsck: Pass 5: Checking group summary information
[ 4.308266]
[ 4.315858] e2fsck: /dev/block/by-name/cache: 39/62976 files (0.0% non-contiguous), 8572/251904 blocks
[ 4.315858]
[ 4.329467] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
[ 4.338949] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 4.357639] EXT4-fs (mmcblk0p22): recovery complete
[ 4.363202] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 4.386258] Synaptics PVR init. Version 201803121700
[ 4.391443] pvr: clockspeed: 660222222
[ 4.396135] pvr: register base: 0xf7980000
[ 4.400899] pvr: register size: 0x80000
[ 4.405395] pvr: irq: 20
[ 4.409459] pvr: need alloc from dma zone: true.
[ 4.414276] PVR_K: 190: Read BVNC 22.46.54.330 from HW device registers
[ 4.421212] PVR_K: 190: RGX Device registered with BVNC 22.46.54.330
[ 4.428146] pvrsrvkm f7980000.gpu: opp[1/2]: (400000000 Hz, 0 uV)
[ 4.434443] pvrsrvkm f7980000.gpu: opp[2/2]: (700000000 Hz, 0 uV)
[ 4.442311] [drm] Initialized pvr 1.11.5516664 20170530 on minor 0
[ 4.448967] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 4.457364] register card failed (-517)
[ 4.483466] snd_soc_ad8xxxx: loading out-of-tree module taints kernel.
[ 4.491402] ad8xxxx_i2c_probe---------------1024
[ 4.492517] e2fsck: e2fsck 1.44.4 (18-Aug-2018)
[ 4.492517]
[ 4.492538] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 4.492538]
[ 4.492543] e2fsck: Pass 2: Checking directory structure
[ 4.492543]
[ 4.502493] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 4.524160] ad8xxxx_parse_dt ad83586b_powerdown_pin = 499!
[ 4.529895] ad8xxxx_parse_dt ad82584f_powerdown_pin = 448!
[ 4.535588] ad8xxxx_i2c_probe---------------1051 probe end
[ 4.541465] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 4.549904] register card failed (-517)
[ 4.554651] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 4.569252] wa206829b_parse_dt reset_pin = 507!
[ 4.573947] wa206829b_parse_dt a113x_pin = 448!
[ 4.578664] wa206829b_parse_dt powerdown_pin = 499!
[ 4.583903] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 4.585560] init: 4 output lines suppressed due to ratelimiting
[ 4.598589] register card failed (-517)
[ 4.607894] cx2081x_i2c_probe
[ 4.611151] cx2081x_i2c_probe reset 50msDRM_Configure gKMVersion[=0x4])
MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1
TA_CloseSessionEntryPoint
TA_DestroyEntryPoint
nick_id=BF62
nick_prefix=UA300_
mkfifo: /data/vendor/ledd_fifo: File exists
console:/ $ Offline buffer address for plane 0 are 0x65308000, 0x658f7000,
All Planes are closed. cpcb0_ctrl2 = 0x40
TZ WARNING[TEE_TARegister:53] the TA (AAC) has been registered
[ 9333]CEC(SM): ----------SMCEC2SM: received cec msg:id=1----------
[ 9339]I(SM): Got Appready packet from SoC CEC: 01 00 00 00 01 00 00 00
[ 9347]I(SM): SM CEC:pcBody[4]=0x1.
[ 9351]I(SM): SMCEC2SM: sending launch req to SOC: 06 00 00 00
[ 14531]I(SM): @@@WIFIBTI$$$ gap: 512, wifibt_timer_id = 0
[ 64.718585] Kernel panic - not syncing: Out of memory and no killable processes...
[ 64.718585]
[ 64.727930] CPU: 3 PID: 1395 Comm: Feed: epg_ty=1 Tainted: G O 4.9.178 #1
[ 64.736105] Hardware name: MARVELL BG5CT FFV BOARD (DT)
[ 64.741498] Call trace:
[ 64.744032] [<0000000044e3b728>] dump_backtrace+0x0/0x240
[ 64.749608] [<00000000579ace6a>] show_stack+0x14/0x1c
[ 64.754826] [<000000000847c887>] dump_stack+0xcc/0x104
[ 64.760133] [<00000000f6a0c998>] panic+0x134/0x294
[ 64.765082] [<00000000a0cd6eb9>] task_will_free_mem+0x0/0x120
[ 64.771016] [<00000000498e1560>] __alloc_pages_nodemask+0xee0/0x10b0
[ 64.777575] [<000000002f878cab>] pagecache_get_page+0x1c8/0x2fc
[ 64.783687] [<0000000027d753cd>] filemap_fault+0x518/0x678
[ 64.789353] [<000000006019b5b2>] ext4_filemap_fault+0x38/0x58
[ 64.795286] [<000000000d17a6bf>] __do_fault+0xd8/0x188
[ 64.800594] [<000000006260d4f9>] handle_mm_fault+0xbd0/0xed4
[ 64.806441] [<000000004fcb497a>] do_page_fault+0x1f4/0x354
[ 64.812105] [<00000000613554d0>] do_translation_fault+0x44/0x94
[ 64.818217] [<0000000065a5bb00>] do_mem_abort+0x4c/0xc8
[ 64.823611] Exception stack(0xffffffc0379c3ec0 to 0xffffffc0379c3ff0)
[ 64.830261] 3ec0: 00000000ebbe59b2 0000000000000000 0000000000000038 00000000e866c924
[ 64.838345] 3ee0: 00000000e866c478 00000000eddf4c85 00000000e866c478 00000000e866c928
[ 64.846430] 3f00: 00000000000001d2 0000000000000000 00000000eddf4c7a 0000000000000000
[ 64.854513] 3f20: 00000000ebbeed98 00000000e866c468 00000000ebbd0a47 0000000000000000
[ 64.862596] 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 64.870680] 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 64.878762] 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 64.886846] 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 64.894931] 3fc0: 00000000edde560e 0000000000030030 00000000e866c914 ffffffffffffffff
[ 64.903013] 3fe0: 0000000000000000 0000000000000000
[ 64.908054] [<00000000c54179ac>] el0_da+0x20/0x24
[ 64.912909] SMP: stopping secondary CPUs
[ 64.916960] Kernel Offset: disabled
[ 64.920559] Memory Limit: none
[ 64.923713] Rebooting in 5 seconds..
[ 71141]I(SM): %%%%SM:Msg reset system%%%%
[ 71145]I(SM): ******enter flow ---Sysreset to Active---
[ 71151]I(SM): soc_assert done
[ 71154]I(SM): peripheral_assert done
[ 71162]I(SM): mv_sm_power_socpoweroff done
[ 71470]I(SM): mv_sm_power_socpoweron done
[ 71526]I(SM): peripheral_assert done
[ 71530]I(SM): soc_assert done
[ 71626]I(SM): peripheral_deassert done
[ 71629]I(SM): soc_deassert done
init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
init syspll 800MHz
RKtEKs_mI: Dr e(lbeytasee[ 0i:7d] )0 x=d 9c091200007,00 c0o00mm00i0t0 at0im
eU LWTed (Abpyrt e2[40 :17]3:)1 7 : 5 5 =2 041b29 8-10c780a404
61e1ec
Chip version = 0xa0
Check bootmode = 0x0 !
Image Load done with bootmode=0x0 !
NOTICE: bl31v13692d41f6
starting...5200a7914a95
BOOT_REASON: reboot
PMIC: SY8824B selected for board bg5ct_ffv !
set Vcpu from 1050000uv to 1000000uv
set Vcore from 1050000uv to 1100000uv
####power down AMP.
sub_cmd_id: 4, param_len: 0x2c, 0x0, 0x4
check keys ret=1
####register ta LOGO
register_ta:tz comm rsp done! 80000000, 0
####register ta CYPT
register_ta:tz comm rsp done! 80000000, 0
[fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 6
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 6000100
MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1
MV_VPP_FL_Init:891: enableFlushCache=0, iHDMIEnable=0, enableAutoPush=1
[fastlogo] value of frame number=3
[fastlogo] got fit size logo: 1280x720(index:1, num:3)
[fastlogo] showlogo_start: logo_start=4148224, logo_size=1843200, logo_width=1280, logo_height=720, logo_stride=2560
MV_VPPOBJ_FL_DisplayFrame:4193: enableInterrupt=0
load boot normal image.
BOOT IMAGE HEADER VERSION: 2 !
verify slot done
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 7
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 7000200
DRM_SetVersionsV4: Bootpatchlevel: 0x30188
DRM_SetVersionsV4: Vendorpatchlevel: 0x30188
DRM_SetVersionsV4: Systempatchlevel: 0x30188
INFO: set eMMC dll_phsel0 to 0x2a for kernel.
size of allocated memory is not correct!
can't find the allocated memory
[ 0] Start kernel at 0x05880000
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.178 (jim@vas-010870-ubuntu18) (Android (5407736 based on r353983b) clang version 9.0.2 (https://android.googlesource.com/toolchain/clang 649b4adfc45b26ae937fe597ef6134d244f89686) (https://android.googlesource.com/toolchain/llvm 45936e9d187aaac2b7c0245f6f8c10138f6a02e9) (based on LLVM 9.0.2svn)) #1 SMP PREEMPT Tue May 11 02:39:53 CST 2021
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] MAX DMA PHYS limited to 2048MB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 22 pages/cpu s52288 r8192 d29632 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 638064
[ 0.000000] Kernel command line: androidboot.boot_devices=soc/f7aa0000.sdhci console=ttyS0,115200 init=/init root=/dev/ram0 androidboot.console=ttyS0 androidboot.hardware=sequoia androidboot.wificountrycode=US firmware_class.path=/vendor/firmware loop.max_part=7 max_dma_phys=2G buildvariant=userdebug androidboot.serialno=000000002099 androidboot.deviceid=DEVID123456789 androidboot.vbmeta.device=PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d androidboot.vbmeta.avb_version=1.1 androidboot.vbmeta.device_state=locked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=6848 androidboot.vbmeta.digest=7ee54280d769eeb85ef6bf536e775cc2af7a50a22aaaf188a4e276c2a8fbbf52 androidboot.veritymode=disabled androidboot.dtbo_idx=0 androidboot.dtb_idx=0 androidboot.bootloader=2016.11-00210-g6a9651b-dirty macaddr=5c:ba:ef:fe:bf:62 emmc_ts.dev_id=18 emmc_ts.size=4194304 emmc_ts.erasesize=524288 emmc_ts.writesize=8192 androidboot.verifiedbootstate=green androidboot.bootreason=reboot chipid=a001000000
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 13648(83%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB: mapped [mem 0x45bff000-0x49bff000] (64MB)
[ 0.000000] Memory: 2026980K/2592768K available (9662K kernel code, 1070K rwdata, 3308K rodata, 2432K init, 482K bss, 565788K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 9664 KB)
[ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 3328 KB)
[ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 2432 KB)
[ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 1070 KB)
[ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 483 KB)
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00160000 - 0xffffffbf03000000 ( 46 MB actual)
[ 0.000000] memory : 0xffffffc005800000 - 0xffffffc0c0000000 ( 2984 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.000534] Console: colour dummy device 80x25
[ 0.000554] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[ 0.000565] pid_max: default: 32768 minimum: 301
[ 0.000641] Security Framework initialized
[ 0.000650] SELinux: Initializing.
[ 0.000709] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.000718] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001642] sched-energy: CPU device node has no sched-energy-costs
[ 0.001650] Invalid sched_group_energy for CPU0
[ 0.001657] CPU0: update cpu_capacity 1024
[ 0.029952] ASID allocator initialised with 65536 entries
[ 0.200222] Detected VIPT I-cache on CPU1
[ 0.200258] Invalid sched_group_energy for CPU1
[ 0.200261] CPU1: update cpu_capacity 1024
[ 0.200265] CPU1: Booted secondary processor [410fd034]
[ 0.280302] Detected VIPT I-cache on CPU2
[ 0.280329] Invalid sched_group_energy for CPU2
[ 0.280332] CPU2: update cpu_capacity 1024
[ 0.280335] CPU2: Booted secondary processor [410fd034]
[ 0.360385] Detected VIPT I-cache on CPU3
[ 0.360411] Invalid sched_group_energy for CPU3
[ 0.360414] CPU3: update cpu_capacity 1024
[ 0.360417] CPU3: Booted secondary processor [410fd034]
[ 0.360496] Brought up 4 CPUs
[ 0.360534] SMP: Total of 4 processors activated.
[ 0.360543] CPU features: detected feature: 32-bit EL0 Support
[ 0.360554] CPU: All CPU(s) started at EL2
[ 0.360577] alternatives: patching kernel code
[ 0.360728] Invalid sched_group_energy for Cluster3
[ 0.360736] CPU3: update max cpu_capacity 1024
[ 0.360742] Invalid sched_group_energy for Cluster2
[ 0.360748] Invalid sched_group_energy for Cluster1
[ 0.360754] Invalid sched_group_energy for Cluster0
[ 0.370315] CPU1: update max cpu_capacity 1024
[ 0.370447] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.370462] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.370607] pinctrl core: initialized pinctrl subsystem
[ 0.371316] NET: Registered protocol family 16
[ 0.400385] cpuidle: using governor menu
[ 0.400654] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
[ 0.400664] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.400858] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.450998] SCSI subsystem initialized
[ 0.451196] usbcore: registered new interface driver usbfs
[ 0.451248] usbcore: registered new interface driver hub
[ 0.451307] usbcore: registered new device driver usb
[ 0.452366] i2c_designware f7fcb000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw2-pmux, deferring probe
[ 0.452398] i2c_designware f7fcc000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw3-pmux, deferring probe
[ 0.452436] Linux video capture interface: v2.00
[ 0.452652] Marvell Berlin ION information
[ 0.452662] heap_id[0] memory start[49c00000] len[1a000000] name[NonSecure] type[2] attri[00000f36]
[ 0.452670] heap_id[1] memory start[63c00000] len[01400000] name[NonSecure-NC] type[5] attri[00000f3a]
[ 0.452679] heap_id[2] memory start[65000000] len[1b000000] name[Secure] type[5] attri[00000f3d]
[ 0.452687] heap_id[3] memory start[00000000] len[00000000] name[system-ion] type[0] attri[00000000]
[ 0.452692] berlin found 1 secure heap
[ 0.452698] berlin found secure heap[0] head_id[2]
[ 0.544368] Advanced Linux Sound Architecture Driver Initialized.
[ 0.544856] Bluetooth: Core ver 2.22
[ 0.544889] NET: Registered protocol family 31
[ 0.544896] Bluetooth: HCI device and connection manager initialized
[ 0.544908] Bluetooth: HCI socket layer initialized
[ 0.544918] Bluetooth: L2CAP socket layer initialized
[ 0.544949] Bluetooth: SCO socket layer initialized
[ 0.545707] clocksource: Switched to clocksource arch_sys_counter
[ 0.601051] VFS: Disk quotas dquot_6.6.0
[ 0.601115] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.606273] NET: Registered protocol family 2
[ 0.645812] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.646120] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.646758] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.646827] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.646940] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.647167] NET: Registered protocol family 1
[ 0.647427] Trying to unpack rootfs image as initramfs...
[ 0.682089] Freeing initrd memory: 752K
[ 0.682635] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.684876] audit: initializing netlink subsys (disabled)
[ 0.684936] audit: type=2000 audit(1234567890.670:1): initialized
[ 0.685518] workingset: timestamp_bits=45 max_order=19 bucket_order=0
[ 0.692546] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.692719] Registering sdcardfs 0.1
[ 0.692970] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.693175] fuse init (API version 7.26)
[ 0.698088] io scheduler noop registered
[ 0.698097] io scheduler deadline registered (default)
[ 0.698217] io scheduler cfq registered
[ 0.705085] GPIO line 359 (phy0_reset) hogged as output/high
[ 0.723181] marvell,berlin-sm f7f80000.sm: rtc core: registered bsm_rtc as rtc0
[ 0.723932] tz_logger_dev: created 128K log 'tzlogger'
[ 0.723944] MV_VPP_InitMode:Normal mode, ta_flag:0
[ 0.724251] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.724979] console [ttyS0] disabled
[ 0.725028] f7fcd000.uart: ttyS0 at MMIO 0xf7fcd000 (irq = 32, base_baud = 1562500) is a 16550A
[ 1.656438] console [ttyS0] enabled
[ 1.660488] f7fce000.uart: ttyS1 at MMIO 0xf7fce000 (irq = 33, base_baud = 1562500) is a 16550A
[ 1.669723] [drm] Initialized
[ 1.681592] brd: module loaded
[ 1.694008] loop: module loaded
[ 1.697781] zram: Added device: zram0
[ 1.702039] libphy: Fixed MDIO Bus: probed
[ 1.706696] tun: Universal TUN/TAP device driver, 1.6
[ 1.711913] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.719996] Network controller revision: 0010
[ 1.725671] mvneta f7b60000.ethernet eth0: Using random mac address ba:e2:97:99:79:de
[ 1.733993] libphy: orion_mdio_bus: probed
[ 1.738884] PPP generic driver version 2.4.2
[ 1.743384] PPP BSD Compression module registered
[ 1.748263] PPP Deflate Compression module registered
[ 1.753497] PPP MPPE Compression module registered
[ 1.758457] NET: Registered protocol family 24
[ 1.763045] PPTP driver version 0.8.5
[ 1.767147] usbcore: registered new interface driver r8152
[ 1.772861] usbcore: registered new interface driver asix
[ 1.778496] usbcore: registered new interface driver ax88179_178a
[ 1.784823] usbcore: registered new interface driver cdc_ether
[ 1.790901] usbcore: registered new interface driver net1080
[ 1.796796] usbcore: registered new interface driver cdc_subset
[ 1.802964] usbcore: registered new interface driver cdc_ncm
[ 1.808821] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.815996] usbcore: registered new interface driver usb-storage
[ 1.822375] ci_hdrc_usb2_probe---------------61 probe start
[ 1.829233] input: Infra-Red as /devices/virtual/input/input0
[ [ 3 04 9 ]I1(.SM8)3: 53*8**5**]** IRu srbeacdoy*r*e**:* **r*
egistered new interface driver xpad
[ 1.844718] usbcore: registered new interface driver usb_acecad
[ 1.850878] usbcore: registered new interface driver aiptek
[ 1.856681] usbcore: registered new interface driver gtco
[ 1.862291] usbcore: registered new interface driver hanwang
[ 1.868181] usbcore: registered new interface driver kbtab
[ 1.873912] i2c /dev entries driver
[ 1.877771] usbcore: registered new interface driver uvcvideo
[ 1.883704] USB Video Class driver (1.1.1)
[ 1.887947] gspca_main: v2.14.0 registered
[ 1.892606] device-mapper: uevent: version 1.0.3
[ 1.897578] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.906393] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d
[ 1.918882] rtk_btusb: RTKBT_RELEASE_NAME: 20200519_BT_ANDROID_10.0
[ 1.925352] rtk_btusb: Realtek Bluetooth USB driver module init, version 5.2.1
[ 1.932818] rtk_btusb: Register usb char device interface for BT driver
[ 1.939785] usbcore: registered new interface driver rtk_btusb
[ 1.946477] sdhci: Secure Digital Host Controller Interface driver
[ 1.952859] sdhci: Copyright(c) Pierre Ossman
[ 1.957472] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.015768] mmc0: SDHCI controller on f7aa0000.sdhci [f7aa0000.sdhci] using ADMA
[ 2.025639] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.034537] usbcore: registered new interface driver usbhid
[ 2.040333] usbhid: USB HID core driver
[ 2.045489] ashmem: initialized
[ 2.050258] usbcore: registered new interface driver snd-usb-audio
[ 2.059011] ioremap success: vir_addr: (ptrval), size: 0x3000000, phy_addr: (ptrval)!
[ 2.069180] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.077548] register card failed (-517)
[ 2.081578] snd_bt_init
[ 2.084169] u32 classifier
[ 2.086996] Actions configured
[ 2.090530] Netfilter messages via NETLINK v0.30.
[ 2.095619] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.102089] ctnetlink v0.93: registering with nfnetlink.
[ 2.107894] xt_time: kernel timezone is -0000
[ 2.112528] gre: GRE over IPv4 demultiplexor driver
[ 2.117603] IPv4 over IPsec tunneling driver
[ 2.122539] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.128300] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 2.134218] Initializing XFRM netlink socket
[ 2.138675] IPsec XFRM device driver
[ 2.142815] NET: Registered protocol family 10
[ 2.148652] mip6: Mobile IPv6
[ 2.151737] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.153674] mmc0: new HS400 MMC card at address 0001
[ 2.154095] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 2.164365] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[ 2.164604] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[ 2.165016] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
[ 2.167187] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23
[ 2.195867] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.202993] NET: Registered protocol family 17
[ 2.207613] NET: Registered protocol family 15
[ 2.212224] l2tp_core: L2TP core driver, V2.0
[ 2.216746] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 2.222022] Registered cp15_barrier emulation handler
[ 2.227298] Registered setend emulation handler
[ 2.232355] registered taskstats version 1
[ 2.238704] Key type encrypted registered
[ 2.242857] FB: VPP init mode status failed!
[ 2.259070] xhci-hcd f7a20000.xhci: xHCI Host Controller
[ 2.264578] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 1
[ 2.272464] xhci-hcd f7a20000.xhci: hcc params 0x0a000998 hci version 0x100 quirks 0x00010010
[ 2.281327] xhci-hcd f7a20000.xhci: irq 21, io mem 0xf7a20000
[ 2.287436] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.294448] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.301926] usb usb1: Product: xHCI Host Controller
[ 2.306979] usb usb1: Manufacturer: Linux 4.9.178 xhci-hcd
[ 2.312645] usb usb1: SerialNumber: f7a20000.xhci
[ 2.317909] hub 1-0:1.0: USB hub found
[ 2.321814] hub 1-0:1.0: 1 port detected
[ 2.326151] xhci-hcd f7a20000.xhci: xHCI Host Controller
[ 2.331647] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 2
[ 2.339455] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.347926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.354939] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.362408] usb usb2: Product: xHCI Host Controller
[ 2.367458] usb usb2: Manufacturer: Linux 4.9.178 xhci-hcd
[ 2.373124] usb usb2: SerialNumber: f7a20000.xhci
[ 2.378357] hub 2-0:1.0: USB hub found
[ 2.382256] hub 2-0:1.0: 1 port detected
[ 2.386712] ci_hdrc_usb2_probe---------------61 probe start
[ 2.395666] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.400729] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 3
[ 2.435776] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.441485] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.448513] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.455983] usb usb3: Product: EHCI Host Controller
[ 2.461022] usb usb3: Manufacturer: Linux 4.9.178 ehci_hcd
[ 2.466698] usb usb3: SerialNumber: ci_hdrc.0
[ 2.471569] hub 3-0:1.0: USB hub found
[ 2.475471] hub 3-0:1.0: 1 port detected
[ 2.479913] chipidea-usb2 f7ed0000.usb: set of GPIOH_5(496) as USB Hub reset
[ 2.487212] chipidea-usb2 f7ed0000.usb: ok to acquire gpio and set output
[ 2.495604] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.504000] register card failed (-517)
[ 2.508374] ALSA device list:
[ 2.511437] No soundcards found.
[ 2.515071] ttyS0 - failed to request DMA
[ 2.519789] Freeing unused kernel memory: 2432K
[ 2.528592] init: init first stage started!
[ 2.533202] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[ 2.541358] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.582287] init: [libfs_mgr]Created logical partition product on device /dev/block/dm-0
[ 2.601363] init: [libfs_mgr]Created logical partition vendor on device /dev/block/dm-1
[ 2.630317] init: [libfs_mgr]Created logical partition system on device /dev/block/dm-2
[ 2.639181] init: [libfs_mgr]superblock s_max_mnt_count:10,/dev/block/by-name/metadata
[ 2.647407] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[ 2.661236] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory
[ 2.672514] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk0p20 (executable not in system image)
[ 2.688164] EXT4-fs (mmcblk0p20): warning: maximal mount count reached, running e2fsck is recommended
[ 2.698388] EXT4-fs (mmcblk0p20): recovery complete
[ 2.703873] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: discard
[ 2.727914] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1
[ 2.741067] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1
[ 2.750219] random: fast init done
[ 2.764567] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1
[ 2.779091] init: 16 output lines suppressed due to ratelimiting
[ 2.788714] random: init: uninitialized urandom read (40 bytes read)
[ 2.867210] random: init: uninitialized urandom read (40 bytes read)
[ 2.875834] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 2.887199] init: Loading SELinux policy
[ 2.906480] usb 2-1: New USB device found, idVendor=0781, idProduct=5591
[ 2.913406] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.920812] usb 2-1: Product: Ultra USB 3.0
[ 2.925134] usb 2-1: Manufacturer: SanDisk
[ 2.929390] usb 2-1: SerialNumber: 4C530000151204101550
[ 2.935275] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 2.941866] scsi host0: usb-storage 2-1:1.0
[ 2.946646] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.954999] register card failed (-517)
[ 3.020505] audit: type=1403 audit(1234567893.010:2): policy loaded auid=4294967295 ses=4294967295
[ 3.029976] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
[ 3.029976]
[ 3.040399] audit: type=1404 audit(1234567893.030:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 3.090764] selinux: SELinux: Loaded file_contexts
[ 3.090764]
[ 3.100946] random: init: uninitialized urandom read (40 bytes read)
[ 3.140568] init: init second stage started!
[ 3.169034] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 3.181505] selinux: SELinux: Loaded file_contexts
[ 3.181505]
[ 3.188016] init: Running restorecon...
[ 3.206232] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 3.206232]
[ 3.221517] init: Do not have permissions to set 'ro.com.google.gmsversion' to 'Q_GTVS' in property file '/vendor/build.prop': SELinux permission check failed
[ 3.236258] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 3.236258]
[ 3.251565] init: Do not have permissions to set 'ro.product.firmware_version' to '19.524.19' in property file '/vendor/build.prop': SELinux permission check failed
[ 3.267816] init: Couldn't load property file '/product_services/build.prop': open() failed: No such file or directory: No such file or directory
[ 3.281313] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[ 3.418171] ueventd: ueventd started!
[ 3.425919] apexd: Bootstrap subcommand detected
[ 3.425937] selinux: SELinux: Loaded file_contexts
[ 3.425937]
[ 3.426081] ueventd: Parsing file /ueventd.rc...
[ 3.437686] ueventd: Parsing file /vendor/ueventd.rc...
[ 3.447680] ueventd: Parsing file /odm/ueventd.rc...
[ 3.451774] apexd: Scanning /system/apex for embedded keys
[ 3.452590] apexd: Scanning /product/apex for embedded keys
[ 3.452687] apexd: ... does not exist. Skipping
[ 3.452780] apexd: Scanning /system/apex looking for APEX packages.
[ 3.452923] apexd: Found /system/apex/com.android.conscrypt
[ 3.453114] apexd: Skipped when bootstrapping
[ 3.453213] apexd: Found /system/apex/com.android.media
[ 3.453398] apexd: Skipped when bootstrapping
[ 3.453498] apexd: Found /system/apex/com.android.media.swcodec
[ 3.456283] apexd: 9 output lines suppressed due to ratelimiting
[ 3.465616] audit: type=1400 audit(1234567893.450:4): avc: denied { write } for pid=174 comm="init" name="panic_on_oops" dev="proc" ino=8270 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_panic:s0 tclass=file permissive=0
[ 3.466675] audit: type=1400 audit(1234567893.460:5): avc: denied { write } for pid=174 comm="init" name="hung_task_timeout_secs" dev="proc" ino=84 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_hung_task:s0 tclass=file permissive=0
[ 3.533874] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.533878] register card failed (-517)
[ 3.560465] [amp_driver] register cdev device major [246]
[ 3.560468] [amp_driver] setup cdevs device minor [0]
[ 3.560532] [amp_driver] create device sysfs [ampcore]
[ 3.560535] [amp_driver] amp_device_init ok
[ 3.560647] [amp_driver] amp_probe OK
[ 3.560795] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.560798] register card failed (-517)
[ 3.582214] [tsp kernel driver] register cdev device major [245]
[ 3.582218] [tsp kernel driver] setup cdevs device minor [0]
[ 3.582279] [tsp kernel driver] create device sysfs [tsp]
[ 3.582281] [tsp kernel driver] tsp_device_init ok
[ 3.582282] [tsp kernel driver] berlin_tsp_probe OK
[ 3.582435] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.582438] register card failed (-517)
[ 3.603183] [vpu kernel driver] vpu probe enter
[ 3.603189] [vpu kernel driver] find vpu device h1
[ 3.603209] [vpu kernel driver] request irq:18
[ 3.603213] [vpu kernel driver] register space [mem 0xf7000000-0xf73fffff]
[ 3.603309] [vpu kernel driver] vpu:h1 probe ok
[ 3.603460] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.603463] register card failed (-517)
[ 3.603497] [vpu kernel driver] vpu probe enter
[ 3.603499] [vpu kernel driver] find vpu device vxg
[ 3.603506] [vpu kernel driver] request irq:19
[ 3.603507] [vpu kernel driver] register space [mem 0xf7600000-0xf77fffff]
[ 3.603561] [vpu kernel driver] vpu:vxg probe ok
[ 3.603641] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.603643] register card failed (-517)
[ 3.624846] [zsp kernel driver] zsp probe enter
[ 3.624870] [zsp kernel driver] register space [mem 0xf7c00000-0xf7c7ffff]
[ 3.624963] [zsp kernel driver] zsp:zsp probe ok
[ 3.625122] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.625125] register card failed (-517)
[ 3.745635] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 3.755737] ueventd: Parsing file /ueventd.sequoia.rc...
[ 3.761240] ueventd: Unable to read config file '/ueventd.sequoia.rc': open() failed: No such file or directory
[ 3.960060] ueventd: Coldboot took 0.187 seconds
[ 3.988013] Registered swp emulation handler
[ 3.996747] scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
[ 4.006582] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 4.012672] file system registered
[ 4.018870] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 4.026915] register card failed (-517)
[ 4.031043] sd 0:0:0:0: [sda] Write Protect is off
[ 4.037461] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.060894] sda: sda1
[ 4.075786] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.081969] logd.auditd: start
[ 4.085478] logd.klogd: 4079760360
[ 4.089239] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts:
[ 4.093741] EXT4-fs (mmcblk0p21): Ignoring removed nomblk_io_submit option
[ 4.108192] EXT4-fs (mmcblk0p21): recovery complete
[ 4.114715] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 4.245462] e2fsck: e2fsck 1.44.4 (18-Aug-2018)
[ 4.245462]
[ 4.251713] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 4.251713]
[ 4.259292] e2fsck: Pass 2: Checking directory structure
[ 4.259292]
[ 4.266317] e2fsck: Pass 3: Checking directory connectivity
[ 4.266317]
[ 4.273597] e2fsck: Pass 4: Checking reference counts
[ 4.273597]
[ 4.280358] e2fsck: Pass 5: Checking group summary information
[ 4.280358]
[ 4.287920] e2fsck: /dev/block/by-name/cache: 39/62976 files (0.0% non-contiguous), 8572/251904 blocks
[ 4.287920]
[ 4.301473] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
[ 4.310957] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 4.323073] EXT4-fs (mmcblk0p22): recovery complete
[ 4.328508] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 4.351039] Synaptics PVR init. Version 201803121700
[ 4.356286] pvr: clockspeed: 660222222
[ 4.360962] pvr: register base: 0xf7980000
[ 4.365743] pvr: register size: 0x80000
[ 4.370240] pvr: irq: 20
[ 4.374287] pvr: need alloc from dma zone: true.
[ 4.379127] PVR_K: 191: Read BVNC 22.46.54.330 from HW device registers
[ 4.386060] PVR_K: 191: RGX Device registered with BVNC 22.46.54.330
[ 4.392944] pvrsrvkm f7980000.gpu: opp[1/2]: (400000000 Hz, 0 uV)
[ 4.399258] pvrsrvkm f7980000.gpu: opp[2/2]: (700000000 Hz, 0 uV)
[ 4.407148] [drm] Initialized pvr 1.11.5516664 20170530 on minor 0
[ 4.413736] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 4.422198] register card failed (-517)
[ 4.439680] snd_soc_ad8xxxx: loading out-of-tree module taints kernel.
[ 4.447329] ad8xxxx_i2c_probe---------------1024
[ 4.452115] ad8xxxx_parse_dt ad83586b_powerdown_pin = 499!
[ 4.453223] e2fsck: e2fsck 1.44.4 (18-Aug-2018)
[ 4.453223]
[ 4.453244] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 4.453244]
[ 4.453261] e2fsck: Pass 2: Checking directory structure
[ 4.453261]
[ 4.454166] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 4.456146] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 4.465863] init: 4 output lines suppressed due to ratelimiting
[ 4.503500] ad8xxxx_parse_dt ad82584f_powerdown_pin = 448!
[ 4.509211] ad8xxxx_i2c_probe---------------1051 probe end
[ 4.515080] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 4.532800] register card failed (-517)
DRM_Configure gKMVersion[=0x4])
MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1
TA_CloseSessionEntryPoint
TA_DestroyEntryPoint
nick_id=BF62
nick_prefix=UA300_
mkfifo: /data/vendor/ledd_fifo: File exists
Offline buffer address for plane 0 are 0x65308000, 0x658f7000,
All Planes are closed. cpcb0_ctrl2 = 0x40
console:/ $ [ 7887]I(SM): @@@WIFIBTI$$$ gap: 512, wifibt_timer_id = 0
TZ WARNING[TEE_TARegister:53] the TA (AAC) has been registered
[ 8886]CEC(SM): ----------SMCEC2SM: received cec msg:id=1----------
[ 8892]I(SM): Got Appready packet from SoC CEC: 01 00 00 00 01 00 00 00
[ 8900]I(SM): SM CEC:pcBody[4]=0x1.
[ 8903]I(SM): SMCEC2SM: sending launch req to SOC: 06 00 00 00
[ 14385]I(SM): @@@WIFIBTI$$$ gap: 512, wifibt_timer_id = 0
[ 56.036767] Kernel panic - not syncing: Out of memory and no killable processes...
[ 56.036767]
[ 56.046109] CPU: 1 PID: 1544 Comm: getprop Tainted: G O 4.9.178 #1
[ 56.053651] Hardware name: MARVELL BG5CT FFV BOARD (DT)
[ 56.059042] Call trace:
[ 56.061572] [<000000005dd44221>] dump_backtrace+0x0/0x240
[ 56.067146] [<00000000c6f25715>] show_stack+0x14/0x1c
[ 56.072360] [<0000000003cef000>] dump_stack+0xcc/0x104
[ 56.077666] [<00000000c589f331>] panic+0x134/0x294
[ 56.082613] [<00000000afe58081>] task_will_free_mem+0x0/0x120
[ 56.088545] [<000000004cccec0b>] __alloc_pages_nodemask+0xee0/0x10b0
[ 56.095104] [<00000000fe51e717>] handle_mm_fault+0x810/0xed4
[ 56.100947] [<000000001478ac0c>] do_page_fault+0x1f4/0x354
[ 56.106610] [<00000000299c0e7f>] do_translation_fault+0x44/0x94
[ 56.112720] [<00000000df78d0c1>] do_mem_abort+0x4c/0xc8
[ 56.118114] Exception stack(0xffffffc0923afec0 to 0xffffffc0923afff0)
[ 56.124761] fec0: 0000000000000000 00000000f71b5000 00000000f71b5000 0000000000064000
[ 56.132843] fee0: 00000000f7498354 0000000000000000 00000000f71b5000 00000000f72b8010
[ 56.140926] ff00: 00000000f72b8010 00000000ffddb508 00000000ffddb508 00000000f7498408
[ 56.149008] ff20: 00000000ffdda400 00000000ffdda400 00000000f740129b 0000000000000000
[ 56.157090] ff40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 56.165172] ff60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 56.173253] ff80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 56.181334] ffa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 56.189415] ffc0: 00000000f740129e 0000000000000030 0000000053564d41 ffffffffffffffff
[ 56.197496] ffe0: 0000000000000000 0000000000000000
[ 56.202530] [<00000000d5ef5ecc>] el0_da+0x20/0x24
[ 56.207384] SMP: stopping secondary CPUs
[ 56.211435] Kernel Offset: disabled
[ 56.215035] Memory Limit: none
[ 56.218188] Rebooting in 5 seconds..
[ 62436]I(SM): %%%%SM:Msg reset system%%%%
[ 62440]I(SM): ******enter flow ---Sysreset to Active---
[ 62446]I(SM): soc_assert done
[ 62449]I(SM): peripheral_assert done
[ 62456]I(SM): mv_sm_power_socpoweroff done
[ 62765]I(SM): mv_sm_power_socpoweron done
[ 62821]I(SM): peripheral_assert done
[ 62825]I(SM): soc_assert done
[ 62921]I(SM): peripheral_deassert done
[ 62924]I(SM): soc_deassert done
init cpupll 800MHz
init mempll 2400MHz
init 3GB DDR, lib version r63074
hw_init done
custom table done
asking BCM to load miniloader.
init syspll 800MHz
RKEK_ID (btsymt:e[ 0r:el7]e)a s=e i0d1 0000xd009c009020070,00 aco0m
mUiLt T ti(mbeyt Wee[d0 :A7p]r) 24 1 3= :41b7:25851 c28a014496 1-0e710e0c
Chip version = 0xa0
Check bootmode = 0x0 !
Image Load done with bootmode=0x0 !
NOTICE: bl31v13692d41f6
starting...5200a7914a95
BOOT_REASON: reboot
PMIC: SY8824B selected for board bg5ct_ffv !
set Vcpu from 1050000uv to 1000000uv
set Vcore from 1050000uv to 1100000uv
####power down AMP.
sub_cmd_id: 4, param_len: 0x2c, 0x0, 0x4
check keys ret=1
####register ta LOGO
register_ta:tz comm rsp done! 80000000, 0
####register ta CYPT
register_ta:tz comm rsp done! 80000000, 0
[fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 6
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 6000100
MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1
MV_VPP_FL_Init:891: enableFlushCache=0, iHDMIEnable=0, enableAutoPush=1
[fastlogo] value of frame number=3
[fastlogo] got fit size logo: 1280x720(index:1, num:3)
[fastlogo] showlogo_start: logo_start=4148224, logo_size=1843200, logo_width=1280, logo_height=720, logo_stride=2560
MV_VPPOBJ_FL_DisplayFrame:4193: enableInterrupt=0
load boot normal image.
BOOT IMAGE HEADER VERSION: 2 !
verify slot done
TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 7
invoke command 0x00000000
TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 7000200
DRM_SetVersionsV4: Bootpatchlevel: 0x30188
DRM_SetVersionsV4: Vendorpatchlevel: 0x30188
DRM_SetVersionsV4: Systempatchlevel: 0x30188
INFO: set eMMC dll_phsel0 to 0x2a for kernel.
size of allocated memory is not correct!
can't find the allocated memory
[ 0] Start kernel at 0x05880000
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.178 (jim@vas-010870-ubuntu18) (Android (5407736 based on r353983b) clang version 9.0.2 (https://android.googlesource.com/toolchain/clang 649b4adfc45b26ae937fe597ef6134d244f89686) (https://android.googlesource.com/toolchain/llvm 45936e9d187aaac2b7c0245f6f8c10138f6a02e9) (based on LLVM 9.0.2svn)) #1 SMP PREEMPT Tue May 11 02:39:53 CST 2021
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] MAX DMA PHYS limited to 2048MB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 22 pages/cpu s52288 r8192 d29632 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 638064
[ 0.000000] Kernel command line: androidboot.boot_devices=soc/f7aa0000.sdhci console=ttyS0,115200 init=/init root=/dev/ram0 androidboot.console=ttyS0 androidboot.hardware=sequoia androidboot.wificountrycode=US firmware_class.path=/vendor/firmware loop.max_part=7 max_dma_phys=2G buildvariant=userdebug androidboot.serialno=000000002099 androidboot.deviceid=DEVID123456789 androidboot.vbmeta.device=PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d androidboot.vbmeta.avb_version=1.1 androidboot.vbmeta.device_state=locked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=6848 androidboot.vbmeta.digest=7ee54280d769eeb85ef6bf536e775cc2af7a50a22aaaf188a4e276c2a8fbbf52 androidboot.veritymode=disabled androidboot.dtbo_idx=0 androidboot.dtb_idx=0 androidboot.bootloader=2016.11-00210-g6a9651b-dirty macaddr=5c:ba:ef:fe:bf:62 emmc_ts.dev_id=18 emmc_ts.size=4194304 emmc_ts.erasesize=524288 emmc_ts.writesize=8192 androidboot.verifiedbootstate=green androidboot.bootreason=reboot chipid=a001000000
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 13648(83%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB: mapped [mem 0x45bff000-0x49bff000] (64MB)
[ 0.000000] Memory: 2026980K/2592768K available (9662K kernel code, 1070K rwdata, 3308K rodata, 2432K init, 482K bss, 565788K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 9664 KB)
[ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 3328 KB)
[ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 2432 KB)
[ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 1070 KB)
[ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 483 KB)
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00160000 - 0xffffffbf03000000 ( 46 MB actual)
[ 0.000000] memory : 0xffffffc005800000 - 0xffffffc0c0000000 ( 2984 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.000526] Console: colour dummy device 80x25
[ 0.000546] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[ 0.000557] pid_max: default: 32768 minimum: 301
[ 0.000634] Security Framework initialized
[ 0.000642] SELinux: Initializing.
[ 0.000700] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.000709] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001629] sched-energy: CPU device node has no sched-energy-costs
[ 0.001639] Invalid sched_group_energy for CPU0
[ 0.001645] CPU0: update cpu_capacity 1024
[ 0.029954] ASID allocator initialised with 65536 entries
[ 0.200222] Detected VIPT I-cache on CPU1
[ 0.200260] Invalid sched_group_energy for CPU1
[ 0.200263] CPU1: update cpu_capacity 1024
[ 0.200266] CPU1: Booted secondary processor [410fd034]
[ 0.280294] Detected VIPT I-cache on CPU2
[ 0.280321] Invalid sched_group_energy for CPU2
[ 0.280324] CPU2: update cpu_capacity 1024
[ 0.280327] CPU2: Booted secondary processor [410fd034]
[ 0.360377] Detected VIPT I-cache on CPU3
[ 0.360403] Invalid sched_group_energy for CPU3
[ 0.360406] CPU3: update cpu_capacity 1024
[ 0.360409] CPU3: Booted secondary processor [410fd034]
[ 0.360487] Brought up 4 CPUs
[ 0.360525] SMP: Total of 4 processors activated.
[ 0.360534] CPU features: detected feature: 32-bit EL0 Support
[ 0.360546] CPU: All CPU(s) started at EL2
[ 0.360568] alternatives: patching kernel code
[ 0.360718] Invalid sched_group_energy for Cluster3
[ 0.360727] CPU3: update max cpu_capacity 1024
[ 0.360732] Invalid sched_group_energy for Cluster2
[ 0.360738] Invalid sched_group_energy for Cluster1
[ 0.360744] Invalid sched_group_energy for Cluster0
[ 0.370244] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.370260] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.370313] CPU1: update max cpu_capacity 1024
[ 0.370424] pinctrl core: initialized pinctrl subsystem
[ 0.371132] NET: Registered protocol family 16
[ 0.400378] cpuidle: using governor menu
[ 0.400648] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
[ 0.400657] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.400850] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.450988] SCSI subsystem initialized
[ 0.451184] usbcore: registered new interface driver usbfs
[ 0.451236] usbcore: registered new interface driver hub
[ 0.451296] usbcore: registered new device driver usb
[ 0.452355] i2c_designware f7fcb000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw2-pmux, deferring probe
[ 0.452386] i2c_designware f7fcc000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw3-pmux, deferring probe
[ 0.452424] Linux video capture interface: v2.00
[ 0.452644] Marvell Berlin ION information
[ 0.452654] heap_id[0] memory start[49c00000] len[1a000000] name[NonSecure] type[2] attri[00000f36]
[ 0.452662] heap_id[1] memory start[63c00000] len[01400000] name[NonSecure-NC] type[5] attri[00000f3a]
[ 0.452670] heap_id[2] memory start[65000000] len[1b000000] name[Secure] type[5] attri[00000f3d]
[ 0.452678] heap_id[3] memory start[00000000] len[00000000] name[system-ion] type[0] attri[00000000]
[ 0.452684] berlin found 1 secure heap
[ 0.452689] berlin found secure heap[0] head_id[2]
[ 0.544395] Advanced Linux Sound Architecture Driver Initialized.
[ 0.544878] Bluetooth: Core ver 2.22
[ 0.544908] NET: Registered protocol family 31
[ 0.544915] Bluetooth: HCI device and connection manager initialized
[ 0.544926] Bluetooth: HCI socket layer initialized
[ 0.544937] Bluetooth: L2CAP socket layer initialized
[ 0.544964] Bluetooth: SCO socket layer initialized
[ 0.545752] clocksource: Switched to clocksource arch_sys_counter
[ 0.601104] VFS: Disk quotas dquot_6.6.0
[ 0.601169] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.606344] NET: Registered protocol family 2
[ 0.645853] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.646158] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.646796] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.646865] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.646977] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.647200] NET: Registered protocol family 1
[ 0.647445] Trying to unpack rootfs image as initramfs...
[ 0.682142] Freeing initrd memory: 752K
[ 0.682688] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.684922] audit: initializing netlink subsys (disabled)
[ 0.684984] audit: type=2000 audit(1234567890.670:1): initialized
[ 0.685585] workingset: timestamp_bits=45 max_order=19 bucket_order=0
[ 0.692883] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.693056] Registering sdcardfs 0.1
[ 0.693311] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.693516] fuse init (API version 7.26)
[ 0.698427] io scheduler noop registered
[ 0.698435] io scheduler deadline registered (default)
[ 0.698555] io scheduler cfq registered
[ 0.705395] GPIO line 359 (phy0_reset) hogged as output/high
[ 0.723628] marvell,berlin-sm f7f80000.sm: rtc core: registered bsm_rtc as rtc0
[ 0.724372] tz_logger_dev: created 128K log 'tzlogger'
[ 0.724384] MV_VPP_InitMode:Normal mode, ta_flag:0
[ 0.724690] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.725422] console [ttyS0] disabled
[ 0.725470] f7fcd000.uart: ttyS0 at MMIO 0xf7fcd000 (irq = 32, base_baud = 1562500) is a 16550A
[ 1.656878] console [ttyS0] enabled
[ 1.660916] f7fce000.uart: ttyS1 at MMIO 0xf7fce000 (irq = 33, base_baud = 1562500) is a 16550A
[ 1.670152] [drm] Initialized
[ 1.732390] brd: module loaded
[ 1.794985] loop: module loaded
[ 1.808779] zram: Added device: zram0
[ 1.813050] libphy: Fixed MDIO Bus: probed
[ 1.817717] tun: Universal TUN/TAP device driver, 1.6
[ 1.822935] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.831047] Network controller revision: 0010
[ 1.836738] mvneta f7b60000.ethernet eth0: Using random mac address ae:4c:ff:64:e9:b5
[ 1.845040] libphy: orion_mdio_bus: probed
[ 1.849932] PPP generic driver version 2.4.2
[ 1.854433] PPP BSD Compression module registered
[ 1.859307] PPP Deflate Compression module registered
[ 1.864542] PPP MPPE Compression module registered
[ 1.869502] NET: Registered protocol family 24
[ 1.874090] PPTP driver version 0.8.5
[ 1.878195] usbcore: registered new interface driver r8152
[ 1.883907] usbcore: registered new interface driver asix
[ 1.889542] usbcore: registered new interface driver ax88179_178a
[ 1.895882] usbcore: registered new interface driver cdc_ether
[ 1.901940] usbcore: registered new interface driver net1080
[ 1.907835] usbcore: registered new interface driver cdc_subset
[ 1.913999] usbcore: registered new interface driver cdc_ncm
[ 1.919856] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.927022] usbcore: registered new interface driver usb-storage
[ 1.933400] ci_hdrc_usb2_probe---------------61 probe start
[ 1.940263] input: Infra-Red as /devices/virtual/input/input0
[ [ 3 16 01]I.9(S4M64):2 6**]* u*s***bIRc orreea:d y*r*e*gi***s**t
ered new interface driver xpad
[ 1.955709] usbcore: registered new interface driver usb_acecad
[ 1.961873] usbcore: registered new interface driver aiptek
[ 1.967675] usbcore: registered new interface driver gtco
[ 1.973286] usbcore: registered new interface driver hanwang
[ 1.979181] usbcore: registered new interface driver kbtab
[ 1.984908] i2c /dev entries driver
[ 1.988775] usbcore: registered new interface driver uvcvideo
[ 1.994707] USB Video Class driver (1.1.1)
[ 1.998950] gspca_main: v2.14.0 registered
[ 2.003616] device-mapper: uevent: version 1.0.3
[ 2.008591] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 2.017424] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d
[ 2.029920] rtk_btusb: RTKBT_RELEASE_NAME: 20200519_BT_ANDROID_10.0
[ 2.036401] rtk_btusb: Realtek Bluetooth USB driver module init, version 5.2.1
[ 2.043856] rtk_btusb: Register usb char device interface for BT driver
[ 2.050838] usbcore: registered new interface driver rtk_btusb
[ 2.057533] sdhci: Secure Digital Host Controller Interface driver
[ 2.063914] sdhci: Copyright(c) Pierre Ossman
[ 2.068524] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.125797] mmc0: SDHCI controller on f7aa0000.sdhci [f7aa0000.sdhci] using ADMA
[ 2.135683] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.144669] usbcore: registered new interface driver usbhid
[ 2.150463] usbhid: USB HID core driver
[ 2.156655] ashmem: initialized
[ 2.161440] usbcore: registered new interface driver snd-usb-audio
[ 2.169165] ioremap success: vir_addr: (ptrval), size: 0x3000000, phy_addr: (ptrval)!
[ 2.179353] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.187741] register card failed (-517)
[ 2.191807] snd_bt_init
[ 2.194424] u32 classifier
[ 2.197264] Actions configured
[ 2.200801] Netfilter messages via NETLINK v0.30.
[ 2.205920] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.212386] ctnetlink v0.93: registering with nfnetlink.
[ 2.218175] xt_time: kernel timezone is -0000
[ 2.222797] gre: GRE over IPv4 demultiplexor driver
[ 2.227885] IPv4 over IPsec tunneling driver
[ 2.232907] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.238655] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 2.244570] Initializing XFRM netlink socket
[ 2.249089] IPsec XFRM device driver
[ 2.253272] NET: Registered protocol family 10
[ 2.259060] mip6: Mobile IPv6
[ 2.260019] mmc0: new HS400 MMC card at address 0001
[ 2.260676] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 2.271116] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[ 2.271539] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[ 2.281940] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
[ 2.284331] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23
[ 2.299992] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.306317] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.313428] NET: Registered protocol family 17
[ 2.318051] NET: Registered protocol family 15
[ 2.322660] l2tp_core: L2TP core driver, V2.0
[ 2.327180] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 2.332454] Registered cp15_barrier emulation handler
[ 2.337735] Registered setend emulation handler
[ 2.342787] registered taskstats version 1
[ 2.348865] Key type encrypted registered
[ 2.353019] FB: VPP init mode status failed!
[ 2.369445] xhci-hcd f7a20000.xhci: xHCI Host Controller
[ 2.374953] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 1
[ 2.382846] xhci-hcd f7a20000.xhci: hcc params 0x0a000998 hci version 0x100 quirks 0x00010010
[ 2.391703] xhci-hcd f7a20000.xhci: irq 21, io mem 0xf7a20000
[ 2.397810] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.404822] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.412299] usb usb1: Product: xHCI Host Controller
[ 2.417352] usb usb1: Manufacturer: Linux 4.9.178 xhci-hcd
[ 2.423018] usb usb1: SerialNumber: f7a20000.xhci
[ 2.428282] hub 1-0:1.0: USB hub found
[ 2.432183] hub 1-0:1.0: 1 port detected
[ 2.436526] xhci-hcd f7a20000.xhci: xHCI Host Controller
[ 2.442023] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 2
[ 2.449829] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.458303] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.465317] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.472787] usb usb2: Product: xHCI Host Controller
[ 2.477838] usb usb2: Manufacturer: Linux 4.9.178 xhci-hcd
[ 2.483504] usb usb2: SerialNumber: f7a20000.xhci
[ 2.488737] hub 2-0:1.0: USB hub found
[ 2.492640] hub 2-0:1.0: 1 port detected
[ 2.497094] ci_hdrc_usb2_probe---------------61 probe start
[ 2.506124] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.511174] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 3
[ 2.545819] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.551527] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.558556] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.566027] usb usb3: Product: EHCI Host Controller
[ 2.571068] usb usb3: Manufacturer: Linux 4.9.178 ehci_hcd
[ 2.576743] usb usb3: SerialNumber: ci_hdrc.0
[ 2.581620] hub 3-0:1.0: USB hub found
[ 2.585520] hub 3-0:1.0: 1 port detected
[ 2.589962] chipidea-usb2 f7ed0000.usb: set of GPIOH_5(496) as USB Hub reset
[ 2.597260] chipidea-usb2 f7ed0000.usb: ok to acquire gpio and set output
[ 2.605538] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 2.613931] register card failed (-517)
[ 2.618334] ALSA device list:
[ 2.621397] No soundcards found.
[ 2.625019] ttyS0 - failed to request DMA
[ 2.629728] Freeing unused kernel memory: 2432K
[ 2.638512] init: init first stage started!
[ 2.643123] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[ 2.651258] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.681947] init: [libfs_mgr]Created logical partition product on device /dev/block/dm-0
[ 2.711036] init: [libfs_mgr]Created logical partition vendor on device /dev/block/dm-1
[ 2.720083] init: [libfs_mgr]Created logical partition system on device /dev/block/dm-2
[ 2.728852] init: [libfs_mgr]superblock s_max_mnt_count:10,/dev/block/by-name/metadata
[ 2.737080] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[ 2.750919] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory
[ 2.762201] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk0p20 (executable not in system image)
[ 2.777456] EXT4-fs (mmcblk0p20): warning: maximal mount count reached, running e2fsck is recommended
[ 2.787528] EXT4-fs (mmcblk0p20): recovery complete
[ 2.793024] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: discard
[ 2.816548] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1
[ 2.828371] random: fast init done
[ 2.832754] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1
[ 2.842513] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1
[ 2.857395] init: 16 output lines suppressed due to ratelimiting
[ 2.866647] random: init: uninitialized urandom read (40 bytes read)
[ 2.943858] random: init: uninitialized urandom read (40 bytes read)
[ 2.958112] init: Loading SELinux policy
[ 2.985925] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 3.016535] usb 2-1: New USB device found, idVendor=0781, idProduct=5591
[ 3.023458] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.045788] usb 2-1: Product: Ultra USB 3.0
[ 3.050110] usb 2-1: Manufacturer: SanDisk
[ 3.054330] usb 2-1: SerialNumber: 4C530000151204101550
[ 3.060236] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 3.066966] scsi host0: usb-storage 2-1:1.0
[ 3.071698] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.080064] register card failed (-517)
[ 3.100537] audit: type=1403 audit(1234567893.090:2): policy loaded auid=4294967295 ses=4294967295
[ 3.110017] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
[ 3.110017]
[ 3.120428] audit: type=1404 audit(1234567893.110:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 3.170809] selinux: SELinux: Loaded file_contexts
[ 3.170809]
[ 3.181111] random: init: uninitialized urandom read (40 bytes read)
[ 3.220718] init: init second stage started!
[ 3.249322] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 3.261799] selinux: SELinux: Loaded file_contexts
[ 3.261799]
[ 3.268326] init: Running restorecon...
[ 3.286514] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 3.286514]
[ 3.301818] init: Do not have permissions to set 'ro.com.google.gmsversion' to 'Q_GTVS' in property file '/vendor/build.prop': SELinux permission check failed
[ 3.316554] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0
[ 3.316554]
[ 3.331842] init: Do not have permissions to set 'ro.product.firmware_version' to '19.524.19' in property file '/vendor/build.prop': SELinux permission check failed
[ 3.348091] init: Couldn't load property file '/product_services/build.prop': open() failed: No such file or directory: No such file or directory
[ 3.361589] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[ 3.505628] ueventd: ueventd started!
[ 3.513226] apexd: Bootstrap subcommand detected
[ 3.513383] selinux: SELinux: Loaded file_contexts
[ 3.513383]
[ 3.513527] ueventd: Parsing file /ueventd.rc...
[ 3.525070] ueventd: Parsing file /vendor/ueventd.rc...
[ 3.535065] ueventd: Parsing file /odm/ueventd.rc...
[ 3.539223] apexd: Scanning /system/apex for embedded keys
[ 3.540053] apexd: Scanning /product/apex for embedded keys
[ 3.540150] apexd: ... does not exist. Skipping
[ 3.540245] apexd: Scanning /system/apex looking for APEX packages.
[ 3.540388] apexd: Found /system/apex/com.android.conscrypt
[ 3.540581] apexd: Skipped when bootstrapping
[ 3.540674] apexd: Found /system/apex/com.android.media
[ 3.540876] apexd: Skipped when bootstrapping
[ 3.540972] apexd: Found /system/apex/com.android.media.swcodec
[ 3.543745] apexd: 9 output lines suppressed due to ratelimiting
[ 3.553290] audit: type=1400 audit(1234567893.540:4): avc: denied { write } for pid=173 comm="init" name="panic_on_oops" dev="proc" ino=2146 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_panic:s0 tclass=file permissive=0
[ 3.554179] audit: type=1400 audit(1234567893.540:5): avc: denied { write } for pid=173 comm="init" name="hung_task_timeout_secs" dev="proc" ino=2149 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_hung_task:s0 tclass=file permissive=0
[ 3.631047] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.631050] register card failed (-517)
[ 3.651041] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 3.657256] [amp_driver] register cdev device major [246]
[ 3.657260] [amp_driver] setup cdevs device minor [0]
[ 3.657322] [amp_driver] create device sysfs [ampcore]
[ 3.657326] [amp_driver] amp_device_init ok
[ 3.657453] [amp_driver] amp_probe OK
[ 3.657608] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.657611] register card failed (-517)
[ 3.678874] [tsp kernel driver] register cdev device major [245]
[ 3.678878] [tsp kernel driver] setup cdevs device minor [0]
[ 3.678945] [tsp kernel driver] create device sysfs [tsp]
[ 3.678946] [tsp kernel driver] tsp_device_init ok
[ 3.678947] [tsp kernel driver] berlin_tsp_probe OK
[ 3.679103] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.679106] register card failed (-517)
[ 3.699917] [vpu kernel driver] vpu probe enter
[ 3.699920] [vpu kernel driver] find vpu device h1
[ 3.699941] [vpu kernel driver] request irq:18
[ 3.699944] [vpu kernel driver] register space [mem 0xf7000000-0xf73fffff]
[ 3.700036] [vpu kernel driver] vpu:h1 probe ok
[ 3.700190] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.700193] register card failed (-517)
[ 3.700227] [vpu kernel driver] vpu probe enter
[ 3.700229] [vpu kernel driver] find vpu device vxg
[ 3.700236] [vpu kernel driver] request irq:19
[ 3.700239] [vpu kernel driver] register space [mem 0xf7600000-0xf77fffff]
[ 3.700292] [vpu kernel driver] vpu:vxg probe ok
[ 3.700373] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.700375] register card failed (-517)
[ 3.721024] [zsp kernel driver] zsp probe enter
[ 3.721047] [zsp kernel driver] register space [mem 0xf7c00000-0xf7c7ffff]
[ 3.721134] [zsp kernel driver] zsp:zsp probe ok
[ 3.721290] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 3.721293] register card failed (-517)
[ 3.843366] ueventd: Parsing file /ueventd.sequoia.rc...
[ 3.848886] ueventd: Unable to read config file '/ueventd.sequoia.rc': open() failed: No such file or directory
[ 4.044469] ueventd: Coldboot took 0.184 seconds
[ 4.074286] Registered swp emulation handler
[ 4.086913] scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
[ 4.100622] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 4.102313] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 4.102317] register card failed (-517)
[ 4.123139] sd 0:0:0:0: [sda] Write Protect is off
[ 4.123168] file system registered
[ 4.127827] logd.auditd: start
[ 4.127843] logd.klogd: 4122093840
[ 4.140366] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.160623] sda: sda1
[ 4.165000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.185092] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts:
[ 4.199149] EXT4-fs (mmcblk0p21): Ignoring removed nomblk_io_submit option
[ 4.218502] EXT4-fs (mmcblk0p21): recovery complete
[ 4.224872] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 4.351634] e2fsck: e2fsck 1.44.4 (18-Aug-2018)
[ 4.351634]
[ 4.357923] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 4.357923]
[ 4.365473] e2fsck: Pass 2: Checking directory structure
[ 4.365473]
[ 4.372509] e2fsck: Pass 3: Checking directory connectivity
[ 4.372509]
[ 4.379804] e2fsck: Pass 4: Checking reference counts
[ 4.379804]
[ 4.386640] e2fsck: Pass 5: Checking group summary information
[ 4.386640]
[ 4.394203] e2fsck: /dev/block/by-name/cache: 39/62976 files (0.0% non-contiguous), 8572/251904 blocks
[ 4.394203]
[ 4.395496] Synaptics PVR init. Version 201803121700
[ 4.395561] pvr: clockspeed: 660222222
[ 4.395562] pvr: register base: 0xf7980000
[ 4.395563] pvr: register size: 0x80000
[ 4.395564] pvr: irq: 20
[ 4.395565] pvr: need alloc from dma zone: true.
[ 4.395616] PVR_K: 191: Read BVNC 22.46.54.330 from HW device registers
[ 4.395624] PVR_K: 191: RGX Device registered with BVNC 22.46.54.330
[ 4.395898] pvrsrvkm f7980000.gpu: opp[1/2]: (400000000 Hz, 0 uV)
[ 4.395902] pvrsrvkm f7980000.gpu: opp[2/2]: (700000000 Hz, 0 uV)
[ 4.460275] [drm] Initialized pvr 1.11.5516664 20170530 on minor 0
[ 4.466879] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 4.472098] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
[ 4.473552] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 4.487061] EXT4-fs (mmcblk0p22): recovery complete
[ 4.487393] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 4.494912] snd_soc_ad8xxxx: loading out-of-tree module taints kernel.
[ 4.495787] ad8xxxx_i2c_probe---------------1024
[ 4.495797] ad8xxxx_parse_dt ad83586b_powerdown_pin = 499!
[ 4.495802] ad8xxxx_parse_dt ad82584f_powerdown_pin = 448!
[ 4.530133] register card failed (-517)
[ 4.530172] ad8xxxx_i2c_probe---------------1051 probe end
[ 4.540025] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 4.548415] register card failed (-517)
[ 4.552946] wa206829b_parse_dt reset_pin = 507!
[ 4.557700] wa206829b_parse_dt a113x_pin = 448!
[ 4.562420] wa206829b_parse_dt powerdown_pin = 499!
[ 4.567683] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered
[ 4.576919] register card failed (-517)
[ 4.597885] cx2081x_i2c_probe
[ 4.601078] cx2081x_i2c_probe reset 50ms[ 4.606088] e2fsck: e2fsck 1.44.4 (18-Aug-2018)
[ 4.606088]
[ 4.612311] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 4.612311]
[ 4.620060] e2fsck: Pass 2: Checking directory structure
[ 4.620060]
[ 4.628038] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 4.637837] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 4.658976] init: 4 output lines suppressed due to ratelimiting
[ 4.705196] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI tlv320adc3101-hifi not registered
[ 4.715037] register card failed (-517)
DRM_Configure gKMVersion[=0x4])
MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1
TA_CloseSessionEntryPoint
TA_DestroyEntryPoint
nick_id=BF62
nick_prefix=UA300_
mkfifo: /data/vendor/ledd_fifo: File exists
Offline buffer address for plane 0 are 0x65308000, 0x658f7000,
All Planes are closed. cpcb0_ctrl2 = 0x40
console:/ $ [ 7952]I(SM): @@@WIFIBTI$$$ gap: 512, wifibt_timer_id = 0
TZ WARNING[TEE_TARegister:53] the TA (AAC) has been registered
[ 9371]CEC(SM): ----------SMCEC2SM: received cec msg:id=1----------
[ 9377]I(SM): Got Appready packet from SoC CEC: 01 00 00 00 01 00 00 00
[ 9385]I(SM): SM CEC:pcBody[4]=0x1.
[ 9388]I(SM): SMCEC2SM: sending launch req to SOC: 06 00 00 00
[ 14677]I(SM): @@@WIFIBTI$$$ gap: 512, wifibt_timer_id = 0
|
|
|
Hi, River I attached kernal panic logo during booting with sandisk memory. Best regards Lonnie Kim |
|
|
Hi, Lonnie Below test result are difference output capacitors (66uF and 132uF) of USB power SW for you reference. Output Cap. 22uFx3 (Current design ) EN pin pull-high: 8/50 fail EN pin pull-low : 0/50 fail Output Cap. 22uF x6 EN pin pull-high: 4/50 fail EN pin pull-low : 0/50 fail Thanks ! |
|
|
Hi, Tom I think Pull down + over 120uF would be improve detection issue. Best regards Lonnie Kim |
|
|
Hi, Tom and Sean Please update below test result. Then discuss with testing validity about result. 1. Rework Pull down + over 120uF(DUT 5EA) 2. Detection test: 200times(each DUT) Best regards Lonnie Kim |
|
|
Hi Lonnie, I don't see obvious improvement by using higher value of capacitor but only changed the pull-low resistor. So, I modify the test combination as below then we can have further discuss about the result Also, we are RD team not QA. We don't have enough resource to do such many testing. So, I adjust the test time as below. These tests are expected to take two days to complete it. Please let me know if you have any questions. Thanks! 1. Rework pull down + over 120uF 2. Rework pull down resistor only 3. Detection test: 100time, DUT 3EA. Regards, Sean |
|
|
Hi, Sean I know you are RD team, so you must complete this issue. This issue was raised up at last January. I don't understand what did you do last 4 month. This is very urgent because you cannot make confident there is no problems at HW. Testing methods need to modify 1. Rework pull down + over 120uF --> Okay. 2. Rework pull down resistor only --> Already occurred 1/80, so need to delete. 3. Detection test: 100time, DUT 3EA --> 200 times @ 3 DUT or 100 times @ 5 DUT(Please choose one methods) Best regards Lonnie Kim |
|
|
Hi Lonnie, We definitely will complete this issue. As I mentioned several times, this issue was discussing between Synaptics and Fii in the last 4 months, and this issues can be duplicated in Synaptics EVB. So, both Synaptics and Fii think this issues is related to S/W. We will do the rework for the pull down + over 120uF, and verify the detection test with *3 DUT for 200times. Will update you the test result soon. Regards, Sean |
|
|
Hi, Sean Who think this issue related to S/W in Synaptics? Does he confirm this issue is SW? Best regards Lonnie Kim |
|
|
Hi Lonnie, We have regular meeting with Synaptic PM Jiamin, and he will coordinate all the issues internally. Until last week, we have discussed this issue, and he think this issue is more related to SW, but havn't confirmed yet. Regards, Sean |
|
|
Hi Sean, I would like to ask belows : 1. Does Foxconn still think that the USB issue is SW issue ? 2. What do you think why USB 2.0 and USB 3.0 are different on HW design ? USB 2.0 already applied pull down resister. 3. Do you have any experience to use pull up resister for using USB Power Swich IC that works Active HIGH ? I think you and your company have much experience in STB Biz and USB Port. And I think you have standard solution for USB. Don't you have standard USB design for your product ? |
|
|
Hi, Lonnie The following are today's test result. It still seems to fail test at condition "pull down + over 120uF ". Do we need to further test ? PCB S/N: YUXA07VA Condition: pull down + over 120uF result: 3/100 fail. Thanks ! |
|
|
Hi Lonnie, Please see my comment as below, 1. Does Foxconn still think that the USB issue is SW issue ? ==> We have conducted the USB2.0/3.0 SI & drop test and got pass result already. Based on our test result, we don't see any hardware related issues until now. And based on our previous experiance, the USB detection issue is more related like the interoperability issue, and we believe that this kind of issue are more related to SW normally. 2. What do you think why USB 2.0 and USB 3.0 are different on HW design ? USB 2.0 already applied pull down resister. ==> We just followed Synaptics ref. design. In Synaptics ref. design, the USB 2.0 applied pull-down but USB3.0 doesn't apply pull-down. It's floating, so we apply pull-up resistor. 3. Do you have any experience to use pull up resister for using USB Power Swich IC that works Active HIGH ? ==> I think the pull up or down resistor design with enable pin of USB power switch is more related to the system SoC. So, we should more focus on Synaptics and see what is their comment with this issue and our design. Regards, Sean |
|
|
Hi, Tom Could you test below methods? - Cut VBUS from USB power switch IC, then connect external power supply(5V) to VBUS. -> Stable power to VBUS. If there have occurred problems, it might be SoC issue. If there don't have problems, you should review USB power distribution block. Best regards Lonnie Kim |
|
|
Hi, Lonnie I following your test condition which test result are 3/10 fail. PCB S/N: YUXA07VA Condition: remove USB power SW + external power supply(5V) to VBUS + over 120uF (22uF *6) result: 3/10 fail. Thanks ! |
|
|
Hi, Tom SYnaptics questioned below testing methods. Could you check to SW team? it is so easy to reproduce on their side? I did the test for one day on DVT board, but can't duplicate it. You are right, we need SW to help check this issue. how about keep tuning register value of 0xF7A2503C[5:1]? it seems from 0x10 -> 0xA has some improvement, how about 0x8 or 0x6? Best regards Lonnie Kim |
|
|
Hi Tom Could you test below methods? 1)Remove USB hurb. 2)Connect upstream port and USB 2.0 on USB3.0 connector.(--> BG5_USB1_D+/- direct connect USB2.0 on USB3.0 connector) 3) detection test Best regards Lonnie Kim |
|
|
|
|
|
Hi, Lonnie reply 0001215: 0007128 Test report named "K18X001T00_USB 3.0_1_20210510.mht" is value 0x0A, result pass. Test report named "K18X001T00_USB 3.0_4_20210510.mht" is value 0x07, result margin pass at LFPS Vtx-DIFF-PP item. Test report named "K18X001T00_USB 3.0_5_20210510.mht" is value 0x06, result fail. Attached are the test report for you reference. Thanks ! |
|
|
Hi, Tom Do you have test result tuning register value of 0xF7A2503C[5:1] applied to 0x0A or 0x08? Best regards Lonnie Kim |
|
|
Hi, Lonnie Test result of tuning register value is as below. PCB S/N: YUXA07VA Condition: pull down + 22uF*3 + register value of 0xF7A2503C[5:1] applied to 0x0A result: 0/100 fail Thanks ! |
|
|
Hi, Tom Thank you for your update. Could you request below test to QA team for test validation? Condition: pull down + 22uF*3 + register value of 0xF7A2503C[5:1] applied to 0x0A * 3 DUT * 200 times Best regards Lonnie Kim |
|
|
Hi, Lonnie Update Hot-Plug detect test result to you. Our QA found USB hot-plug detection fail on 96th times of the 1st DUT. So they stop remaining test. Condition: pull down + 22uF*3 + register value of 0xF7A2503C[5:1] applied to 0x0A Thanks ! Tom |
|
|
@Tom Lee, I think we would like to keep testing even though you have fail. The possibility of 1/96 and 1/x is different. Do you think that you will have fail every 96th test ? If you have any trial no. of this kind of test, please keep testing until you reach the tial no. If you have any idea to fix this issue right away, then you can try again with your fixed solution. BR, SuhYoung YOON |
|
|
Hi, Lonnie Update test result as below. DUT1and DUT2 tested by SQA, DUT3 tested by RD (Tom_LEE). DUT1: failure rate 2/200 DUT2: failure rate 3/200 DUT3: failure rate 0/200 Thanks ! |
|
|
Hi Mr.Yoon, Is it OK to take the solution? - Solution: pull down + 22uF*3 + register value of 0xF7A2503C[5:1] applied to 0x0A - Test result = DUT1: failure rate 2/200 = DUT2: failure rate 3/200 = DUT3: failure rate 0/200 |
|
|
@Bcan Yeh, Do you know the difference between your RD engineer test sequence and QA's ? And I've heard that your SW team will discuss with Synaptics about it. Is there any update ? In your RD engineer test, there is no failure, but there are in QA test. Do they use same USB Drive vendor and USB version ? |
|
|
Hi Mr.Yoon, Do you know the difference between your RD engineer test sequence and QA's ? => It's the same test sequence. And I've heard that your SW team will discuss with Synaptics about it. Is there any update ? => The result of discussion is already applied to the solution. (register value of 0xF7A2503C[5:1] applied to 0x0A) In your RD engineer test, there is no failure, but there are in QA test. Do they use same USB Drive vendor and USB version ? => Yes, it's the same USB Drive. We send it to our QA. |
|
|
Hi Mr. Sean Chiang, Could you check why your test result between RD and QA are different ? Based on same USB Driver and test sequence, the test result is looked different. And SW will not review on this any more. |
|
|
Hi Mr.Yoon, I think the difference in test results is just a matter of probability. According to our previous test experience, the failure occur randomly without any regularity. Perhaps, if RD adds 200 more test, the result may be similar with QA. |
|
|
Hi, Sean So, what is your plan? Best regards Lonnie Kim |
|
|
|
|
|
Hi Lonnie, As discussed, Fii provide the waiver request document of the USB3.0 hot-plug detection issue as attachement. Please review it and close USB detection issue if ALT doesn't any further questions or concerns. Thanks, Regards, Sean |
|
|
Hi, Sean Please add vendor's comment about this issue. Best regards Lonnie Kim |
|
|
Hi Lonnie, Update waiver document as attached file. I added Synaptics's FAE Xiamin's comment in waiver document. Thanks, Regards, Sean |
|
|
Hi sean, I saw this issue on DVT3 B/D, Did you fix it.? |
| Date Modified | Username | Field | Change |
|---|---|---|---|
| 2021-05-01 13:32 | (ALTech) Wooshin Kang | New Issue | |
| 2021-05-01 13:32 | (ALTech) Wooshin Kang | Status | new => assigned |
| 2021-05-01 13:32 | (ALTech) Wooshin Kang | Assigned To | => (SW) Jacky Chiang |
| 2021-05-04 14:04 | (ALTech) Wooshin Kang | Note Added: 0006979 | |
| 2021-05-04 14:57 |
|
Note Added: 0006980 | |
| 2021-05-04 15:42 | (ALTech) Wooshin Kang | Note Added: 0006983 | |
| 2021-05-06 18:05 | (HW) Tom Lee | Issue Monitored: (HW) Tom Lee | |
| 2021-05-06 18:09 | (HW) Tom Lee | Issue Monitored: (ALTech) Philip | |
| 2021-05-06 18:09 | (HW) Tom Lee | Issue Monitored: (HW) Sean Chiang | |
| 2021-05-06 18:12 | (HW) Tom Lee | Issue Monitored: (ALTech) SH Son | |
| 2021-05-06 18:12 | (HW) Tom Lee | Issue Monitored: (ALTech) Lonnie Kim | |
| 2021-05-06 18:23 | (HW) Tom Lee | File Added: BFX-UA300 USB3.0 connector circuit.pdf | |
| 2021-05-06 18:23 | (HW) Tom Lee | Note Added: 0007029 | |
| 2021-05-06 19:55 | (ALTech) Lonnie Kim | Note Added: 0007031 | |
| 2021-05-11 10:30 | (SW) Jacky Chiang | Assigned To | (SW) Jacky Chiang => (SW) River Wong |
| 2021-05-11 13:10 | (ALTech) Lonnie Kim | File Added: SWAN_USB_SANDISK_KERNAL PANIC_210511.txt | |
| 2021-05-11 13:10 | (ALTech) Lonnie Kim | Note Added: 0007076 | |
| 2021-05-11 20:54 | (HW) Tom Lee | Note Added: 0007087 | |
| 2021-05-12 09:38 | (ALTech) Lonnie Kim | Note Added: 0007089 | |
| 2021-05-12 10:45 | (ALTech) Lonnie Kim | Note Added: 0007093 | |
| 2021-05-12 11:22 | (HW) Sean Chiang | Note Added: 0007095 | |
| 2021-05-12 11:23 | (HW) Sean Chiang | Issue Monitored: (PM) Dennis Lu | |
| 2021-05-12 11:23 | (HW) Sean Chiang | Issue Monitored: (PM) Tiffanie Lai | |
| 2021-05-12 11:29 | (HW) Sean Chiang | Issue Monitored: (ALTech) SY Yoon | |
| 2021-05-12 12:08 | (ALTech) Lonnie Kim | Note Added: 0007096 | |
| 2021-05-13 09:57 | (HW) Sean Chiang | Note Added: 0007103 | |
| 2021-05-13 10:10 | (ALTech) Lonnie Kim | Note Added: 0007105 | |
| 2021-05-13 10:42 | (HW) Sean Chiang | Note Added: 0007107 | |
| 2021-05-13 11:17 | (ALTech) SY Yoon | Note Added: 0007108 | |
| 2021-05-13 20:43 | (HW) Tom Lee | Note Added: 0007116 | |
| 2021-05-13 21:06 | (HW) Sean Chiang | Note Added: 0007117 | |
| 2021-05-14 09:08 | (ALTech) Lonnie Kim | Note Added: 0007118 | |
| 2021-05-14 14:19 | (HW) Tom Lee | Note Added: 0007126 | |
| 2021-05-14 15:40 | (ALTech) Lonnie Kim | Note Added: 0007128 | |
| 2021-05-14 16:47 | (ALTech) Lonnie Kim | Note Added: 0007130 | |
| 2021-05-14 19:16 | (HW) Tom Lee | File Added: K18X001T00_USB 3.0_1_20210510.mht | |
| 2021-05-14 19:16 | (HW) Tom Lee | File Added: K18X001T00_USB 3.0_4_20210510.mht | |
| 2021-05-14 19:16 | (HW) Tom Lee | File Added: K18X001T00_USB 3.0_5_Fail_20210510.mht | |
| 2021-05-14 19:16 | (HW) Tom Lee | Note Added: 0007133 | |
| 2021-05-16 18:33 | (ALTech) Lonnie Kim | Note Added: 0007134 | |
| 2021-05-17 07:55 |
|
Issue Monitored: (ALTech) Sun Choul Joung | |
| 2021-05-17 20:42 | (HW) Tom Lee | Note Added: 0007147 | |
| 2021-05-17 21:56 | (ALTech) Lonnie Kim | Note Added: 0007148 | |
| 2021-05-21 17:25 | (HW) Tom Lee | Note Added: 0007203 | |
| 2021-05-24 08:20 | (ALTech) SY Yoon | Note Added: 0007206 | |
| 2021-05-27 17:05 | (HW) Tom Lee | Note Added: 0007279 | |
| 2021-06-08 14:57 | (SW) Bcan Yeh | Note Added: 0007394 | |
| 2021-06-08 14:57 | (SW) Bcan Yeh | Assigned To | (SW) River Wong => (ALTech) SY Yoon |
| 2021-06-08 16:47 | (ALTech) SY Yoon | Note Added: 0007397 | |
| 2021-06-08 16:48 | (ALTech) SY Yoon | Assigned To | (ALTech) SY Yoon => (SW) Bcan Yeh |
| 2021-06-09 13:52 | (SW) Bcan Yeh | Note Added: 0007406 | |
| 2021-06-09 13:53 | (SW) Bcan Yeh | Assigned To | (SW) Bcan Yeh => (ALTech) SY Yoon |
| 2021-06-09 14:20 | (ALTech) SY Yoon | Assigned To | (ALTech) SY Yoon => (HW) Sean Chiang |
| 2021-06-09 14:23 | (ALTech) SY Yoon | Note Added: 0007407 | |
| 2021-06-10 01:04 | (HW) Sean Chiang | Note Added: 0007423 | |
| 2021-06-10 09:09 | (ALTech) Lonnie Kim | Note Added: 0007426 | |
| 2021-06-21 21:39 | (HW) Sean Chiang | File Added: [ALT]Waiver_request_USB3.0 detection issue.doc.docx | |
| 2021-06-21 21:39 | (HW) Sean Chiang | Note Added: 0007511 | |
| 2021-06-22 08:23 | (ALTech) Lonnie Kim | Note Added: 0007513 | |
| 2021-06-22 19:29 | (HW) Sean Chiang | File Added: [ALT]Waiver_request_USB3.0 detection issue v1.doc.docx | |
| 2021-06-22 19:29 | (HW) Sean Chiang | Note Added: 0007523 | |
| 2021-08-19 12:55 | (ALTech) Wooshin Kang | Note Added: 0007926 | |
| 2021-08-19 12:55 | (ALTech) Wooshin Kang | Note Edited: 0007926 | |
| 2021-12-22 11:07 | (SW) Bcan Yeh | Relationship added | related to 0001018 |
| 2021-12-24 16:44 |
|
Category | SW Issue => HW Issue |
| 2021-12-24 16:47 | (HW) Sean Chiang | Severity | s2-severe => s4-minor |
| 2022-01-10 11:39 | (HW) Sean Chiang | Status | assigned => closed |
